Panasonic nvvp33 操作指南
VIDEO Plus+ Codes for Satellite Receivers / Set Top Box
This VCR is not designed to control (switch on or change channel) your satellite
receiver or Set Top Box, however, it can be taught to recognise VIDEO Plus+
Codes for Satellite stations. The Satellite Receiver or Set Top Box must be
switched on and the correct station selected. Some receivers have their own
timer facility for this purpose. Please refer to your Satellite Receiver/Set Top
Box instructions for use of such timer facilities.
For your VCR to recognise the VIDEO Plus+ Codes for each satellite station,
you must teach your VCR which channel or AV input to record from for the first
time. Otherwise when setting a VIDEO Plus+ recording, the [- -] symbol will
appear in the channel position indicating that the VCR does not know which
channel position to set. Once you have set the channel/AV input once the VCR
will remember it whenever you use a VIDEO Plus+ Code for the station again.
This VCR is not designed to control (switch on or change channel) your satellite
receiver or Set Top Box, however, it can be taught to recognise VIDEO Plus+
Codes for Satellite stations. The Satellite Receiver or Set Top Box must be
switched on and the correct station selected. Some receivers have their own
timer facility for this purpose. Please refer to your Satellite Receiver/Set Top
Box instructions for use of such timer facilities.
For your VCR to recognise the VIDEO Plus+ Codes for each satellite station,
you must teach your VCR which channel or AV input to record from for the first
time. Otherwise when setting a VIDEO Plus+ recording, the [- -] symbol will
appear in the channel position indicating that the VCR does not know which
channel position to set. Once you have set the channel/AV input once the VCR
will remember it whenever you use a VIDEO Plus+ Code for the station again.
!
Press the VIDEO Plus+ button.
!
Enter a VIDEO Plus+ Code from a Satellite TV Guide for a satellite channel,
e.g. Sky 1 using the Numeric buttons. Press to correct any mistakes.
e.g. Sky 1 using the Numeric buttons. Press to correct any mistakes.
!
Press the ENTER button. [ - - ] will appear instead of a channel number/AV
input.
input.
!
Press the CH button to select the channel or AV input that is to be used for
recording from the satellite channel.
recording from the satellite channel.
!
Press the ENTER button to memorise the setting. The VCR will now
automatically set the programme position or AV input correctly when a VIDEO
Plus+ recording is set for this satellite station in the future.
automatically set the programme position or AV input correctly when a VIDEO
Plus+ recording is set for this satellite station in the future.
!
Press
to select the programme that you have just set. Now press the
button to delete it from the timer recording list. It is no
longer needed.
CANCEL/RESET
Video Plus+
8 3 5 4 2 - - - -
!
Repeat the steps above until you have set and deleted dummy timer
recordings for each of the satellite stations that you will make VIDEO Plus+
recordings from.
recordings for each of the satellite stations that you will make VIDEO Plus+
recordings from.
!
Press EXIT when you have finished.
Timer recording
1/3
Pos Date Start Stop
PDC
- - - - - -
10:30 11:30 SP - - -
- - - - - - - -/ - - - -: - - - -: - - - - - -
- - - - - - - -/ - - - -: - - - -: - - - - - -
- - - - - - - -/ - - - -: - - - -: - - - - - -
- - - - - - - -/ - - - -: - - - -: - - - - - -
- - - - - - - -/ - - - -: - - - -: - - - - - -
- - - - - - - -/ - - - -: - - - -: - - - - - -
- - - - - - - -/ - - - -: - - - -: - - - - - -
- - - - - - - -/ - - - -: - - - -: - - - - - -
- - - - - - - -/ - - - -: - - - -: - - - - - -
Invalid entry
Timer recording
1 / 3
Pos
Date Start Stop
PDC
1 AV2
26/10 10:30 11:30 SP ON
-- ----
-- / --
--:-- --:--
- ---
-- ----
-- / --
--:-- --:--
- ---
-- ----
-- / --
--:-- --:--
- ---
-- ----
-- / --
--:-- --:--
- ---
-- ----
-- / --
--:-- --:--
- ---
VIDEO Plus+
Recording with VIDEO Plus+
32