Panasonic dmr-e60eb 说明手册

The self-diagnosis displays appear if a problem occurs with the unit.
The service numbers in the table appear when a problem occurs.
≥The service numbers are a “U” followed by two digits.

The disc is dirty or badly 
scratched.

≥Follow the instructions in “Maintenance and Handling” to clean the disc if it is dirty. 

(page 70)

≥The disc cannot be played if it is scratched and this display doesn’t disappear.

It can not be read for the disk 
which doesn’t cope with it.

≥It can not be read for the disk which doesn’t cope with it. Exchange a disk.

The DVD-RAM/PD lens 
cleaner has finished cleaning.

≥Take the cleaner out of the unit.

You have inserted a disc the 
unit cannot play or record on.

≥Insert a disc the unit can play or record on. (page 10) 

The unit is hot.

≥The unit switches to standby automatically for safety reasons and you cannot operate 

it. Wait for about 30 minutes for the service number to disappear.

≥Select a position with good ventilation when installing the unit.
≥Do not block the cooling fan on the rear of the unit.

The unit fails to operate 
properly.

≥Press [Í/I] to switch the unit to standby. Now press [Í/I] again to turn the unit on.

The remote control code is 
wrong.

≥Change to the correct code. (page 65) 

A power failure occurred or the 
AC mains plug was 
disconnected while the power 
was ON.

≥The unit is carrying out its recovery process. Wait until the message disappears.

Service number

B.book  73 ページ  ２００３年５月２日　金曜日　午前１０時８分