Panasonic DMREH59EM 操作指南

33

RQT9272

Tips

To stop recording
Press [].

[HDD] 
To make a timer recording with your television, connect 
to a television with a Q Link function (  42) that you can 
use for setting timer recordings using a fully wired 21-pin 
Scart cable (  10,11).

  Make timer programming on the 

TV.

 



 to turn the unit off.

–

 

The start and end of recording is controlled 
by TV.

–

 

The titles are recorded to the HDD.

Notes

 When this unit is in EXT LINK standby (“EXT-L” on the unit’s 

display lights), recording from TV does not start.

 Programmes are recorded as one title on this unit when the end 

time of the earlier timer recording and the start time of the later 
timer recording are close to each other.
To divide the titles, go to “Divide Title” (  45).

 When a timer recording is set, DVDs that were recorded using 

a different TV system cannot be played unless the TV system is 
changed in the Setup menu (  71) or the timer recording has 
completed or has been cancelled.

 Timer recordings are activated regardless of whether the unit is 

turned on/off.

 Timer recordings begin when the set time is reached even when 

playing.

 Timer recordings do not begin while editing or copying in normal 

speed mode (  52).

 If the unit is turned on when timer recording begins, it 

remains turned on after recording fi nishes. It does not turn off 
automatically. You can turn the unit off during timer recording.

 When you programme successive timer recordings to start 

immediately one after the other, the unit cannot record the part at 
the beginning of the later programmes.

Programme

Programme

Recorded

Recorded

Not recorded

When the recording drive is “DVD” and there is not 
enough remaining blank space, recording automatically 
switches to the “HDD”. If there is no disc in the tray or 
the disc cannot be recorded on or when timer recording 
starts while copying, the recording drive will be altered to 
the HDD.
 The DIRECT NAVIGATOR shows which programmes 

were relief-recorded (“   ” is displayed.) (  34).

 If the time remaining on the HDD is insufficient, as 

much of the programme as possible will be recorded 
onto the HDD.

[HDD]
If you record a programme onto HDD repeatedly 
everyday or every week using timer recording, the unit 
will record the new programme over the old one.
This function can be used only when weekly 
recording or daily recording is selected.

Notes

 If a programme set for Auto Renewal Recording is protected or 

while play back is taking place from the HDD, or while copying, 
the programme will not be overwritten. Instead the programme 
set for recording will be saved as a separate programme, and this 
programme will be the one to be overwritten when the next Auto 
Renewal Recording takes place.

 Playlists made from programmes that were set for Auto Renewal 

Recording are deleted along with auto renewal.

 When there is not enough space on the HDD, the programme 

may not be recorded completely.

 

PROG

/CHECK

  ,  to select the programme, 

then 

OK

  , to select “RENEW” column.

  , to select “ON”, then 

OK

DMR-EH59EM.indb   33

DMR-EH59EM.indb   33

2009/01/09   9:30:07

2009/01/09   9:30:07