Panasonic DMREH59EM 操作指南

69

RQT9272

Change the settings when you have connected equipment through 
the unit’s DIGITAL AUDIO OUT terminal (  76).
Press [OK] to show the following settings.

Select how to output audio with a sampling frequency of 96 kHz.
Signals are converted to 48 kHz despite the above settings if the 
signals have a sampling frequency of over 96 kHz, or the disc has 
copy protection.
[On]  

Signals are converted to 48 kHz. (Choose when the 
connected equipment cannot process signals with 
sampling frequency of 96 kHz.)

[Off]  

Signals are output as 96 kHz. (Choose when the 
connected equipment can process signals with sampling 
frequency of 96 kHz.)



Choose whether to output by “Bitstream”, which processes Dolby 
Digital signals on other connected equipment, or to convert the 
signals to “PCM (2ch)” on the unit before output. 

[Bitstream]  When connected to equipment with a built-in Dolby 

Digital decoder.

[PCM]  

When connected to equipment without a built-in Dolby 
Digital decoder.



Choose whether to output by “Bitstream”, which processes DTS 
signals on other connected equipment or to convert the signals to 
“PCM (2ch)” on the unit before output. 

[Bitstream]  

When connected to equipment with a built-in DTS 
decoder.

[PCM]  

When connected to equipment without a built-in 
DTS decoder.



Choose whether to output by “Bitstream” which processes MPEG 
audio signals on other connected equipment or to convert the 
signals to “PCM (2ch)” on the unit before output.
[Bitstream] 

 When you have connected the unit to a piece of 
equipment with a built-in MPEG decoder.

[PCM] 

 When you have connected the unit to a piece of 
equipment without a built-in MPEG decoder.

 Incorrect settings can cause noise to be output which can be 

harmful to your ears and speakers, and audio will not be recorded 
properly on media such as mini discs.

  Refer to the operating instructions for connected devices to verify 

whether or not they can decode each of the audio formats.

Choose the audio type when recording or copying with XP mode.
[Dolby Digital] (  92)
[LPCM] (  92)
 The picture quality of LPCM recordings may be lower than that of 

normal XP mode recordings.

 The audio recording becomes Dolby Digital even if you selected 

LPCM when using a recording mode other than XP.

 When recording a bilingual broadcast, select the type of audio in 

advance from “Bilingual Audio Selection” (  left).

You can select the kind of audio when recording from the unit’s DV 
IN terminal (  30).
[Stereo 1]   Records audio (L1, R1)
[Stereo 2]   Records added audio such as narration (L2, R2) 

subsequent to original recording.

[Mix]  

Records both Stereo 1 and Stereo 2.

 When recording bilingual broadcast, select the type of audio in 

advance from “Bilingual Audio Selection” (  left).

Picture

,  select “Picture”      ,  select item   

OK

Select the picture sharpness when recording.
The setting is fi xed with “On” if you set “TV System” to “NTSC” 
(  71).
[On] 

 Select it to record clear picture.

[Off] 

 Normally, use this setting.

Select the type of picture shown when you pause play (  92, Frame 
and Field).
[Automatic]
[Field] 

 Select if jittering occurs when “Automatic” is selected.

[Frame] 

 Select if you cannot see small text or fi ne patterns 
clearly when “Automatic” is selected. 

Select the play mode between playlist chapter segments and 
partially deleted titles.
[On] 

 The chapters in playlists are played seamlessly. This does 
not work when there are several audio types included on the 
playlist and when using Quick View (Play ×1.3). Additionally, 
the positioning of chapter segments may change slightly.

[Off] 

 The points where chapters in playlists change are played 
accurately, but the picture may freeze for a moment.

t

FU

NC

TIO

N M

EN

U 

   

    

 

(  66, Accessing the Setup Menu)

All factory default settings are indicated with “Underlined” text.

Sound

,  select “Sound”      ,  select item   

OK

[DVD-V] (Dolby Digital only)
Change the dynamic range (  92) for easier listening in low volume.
[On] [Off]

Select whether to record the main or secondary audio type when:
 Recording or copying to a DVD-R, DVD-R DL, DVD-RW (DVD-

Video format), +R, +R DL and +RW.

 “Recording Format” is set to “Video format”.
 Recording or copying sound in LPCM (  right, “Audio Mode for XP 

Recording”).

[M 1] [M 2]
 You cannot select the audio on this unit when recording from an 

external source, such as when copying from a video cassette 
recorder (except from DV equipment connected to this unit’s DV 
input terminal). Select the audio on the other equipment.

 When recording from the unit’s DV terminal, select the type of audio 

recording from “Audio Mode for DV Input” (  right).

DMR-EH59EM.indb   69

DMR-EH59EM.indb   69

2009/01/09   9:30:24

2009/01/09   9:30:24