Panasonic DMREH59EM 操作指南

80

RQT9272

Page

H   , F  
(“ ” stands for a service number.)

 An error has occurred. The number following “H” or “F” depends on the 

status of the unit. Check the items below and in the Troubleshooting 
Guide. If the service number still does not disappear after the check, reset 
the unit (  82, “To restore the unit if it freezes”).

−

 If the service numbers fail to clear, note the service numbers and contact a 

qualified service person.

−

DVD   
(“ ” stands for a number.) 

 The remote control and the main unit are using different codes. Change 

the code on the remote control. 

82

HARD ERR



 If there is no change after turning the unit on and off, consult the dealer 

where the unit was purchased.

−

NoERAS

 You cannot delete items on this disc.

The disc may be damaged. Use a new disc.

−

NoREAD 

 The disc is dirty or badly scratched. The unit cannot record, play, or edit.

77

 The disc may be incompatible or of poor quality.

16, 17

 You have used a lens cleaner and it has finished operation. Press 

[ OPEN/CLOSE] on the main unit to eject the disc.

7

NoWRIT

 You cannot write to this disc.

The disc may be damaged. Use a new disc.

−

FINAL

 When the screen asking if you want to finalise the disc appears, the 

message is displayed.

27

PLEASE WAIT



 Displayed when the unit is started. This is not a malfunction.

−

 The unit is carrying out its recovery process. You cannot operate the unit 

while the message is displayed.

−

PROG FULL



 There are already 32 timer recording programmes. Delete unnecessary 

timer recording programmes.

32

REMOVE

 The USB device is drawing too much power. Remove the USB device.

−

SP 35:50, LP 151h
“SP”, “LP” and the numbers are
examples.

  Available space on the HDD or disc.The example “SP 35:50” is displayed 

when less than 100 hours areavailable and the example “LP 151h” is 
displayed when over 100 hoursare available.
“SP” and “LP” are recording modes, “35:50” means “35 hours 50 
minutes”and “151h” means “151 hours”.

−

UNSUPPORT



 You have inserted a disc the unit cannot play or record onto.

16, 17

 You tried to operate with a non-compatible USB memory.

18

UNFORMAT



 You inserted an unformatted DVD-RAM, DVD-RW, +RW, an unused +R, 

+R DL or DVD-RW (DVD-Video format) that has been recorded on other 
equipment.
Format the disc to use it.
However all the recorded contents on the disc are deleted.

64

EXT-L

 This unit is in EXT LINK standby. EXT LINK has been turned on and will 

stop operation on the unit until the recording has completed. 
Press [EXT LINK] to stop recording or cancel linked timer.

F74 

 The HDMI connection could not be authenticated due to a transfer 

malfunction. Consult the dealer where the unit was purchased.

−

F75 

 The HDMI connection could not be authenticated due to an internal data 

malfunction. Consult the dealer where the unit was purchased.

−

U59 

 The unit is hot.

The unit switches to standby for safety reasons. Wait for about 30 minutes 
until the message disappears.
Select a position with good ventilation when installing the unit. Do not 
block the cooling fan on the rear of the unit.

−

U61

 (When a disc is not inserted) Displays when a malfunction has occurred. 

This is displayed when the unit is in the recovery process to return to 
normal operation; it is not broken. Once the display disappears you can 
use the unit again.

−

U76

 HDMI cannot be output because you are connected to a model that does 

not support copyright protection.

−



  The message are alternately displayed.

DMR-EH59EM.indb   80

DMR-EH59EM.indb   80

2009/01/09   9:30:28

2009/01/09   9:30:28