Panasonic SC-HT07 操作指南
Op
eratio
ns
21
RQT7
38
0
Making a recording
INPUT SELECTOR
MUSIC
AV/MOVE
TUNE
TUNE
^
SFC
VIDEO IN
L AUDIO IN R VCR 2
8
WER
AUDIO OUT
VIDEO OUT
Video camera
You can record to a tape deck connected to TAPE REC OUT
(SC-HT07), or a DVD recorder/VCR connected to DVR/VCR1
(DVD/VCR) OUT.
(SC-HT07), or a DVD recorder/VCR connected to DVR/VCR1
(DVD/VCR) OUT.
1.Press [INPUT SELECTOR] to select the source to be
recorded.
2.Begin recording.
Follow your recording unit’s operating instructions.
3.Start the source to be recorded.
Note
• (SC-HT07) With a tape deck, you can record any analogue
source except TAPE.
• With a DVD recorder/VCR, you can record any analogue
source except DVR/VCR1 (DVR/VCR).
• When you select DVD 6CH INPUT mode, only sound from the
front left and right channels is recorded.
• Some sources do not allow digital recording. Connect through
the analog terminals and select "ANALOG" input.
Recording on other equipment
Using the VCR2 terminals
(for SC-HT07)
These terminals are convenient for equipment you want to
connect only temporarily. Select "VCR2" for input.
connect only temporarily. Select "VCR2" for input.
INPUT SELECTOR
INPUT SELECTOR
MUSIC
AV/MOVE
TUNE
TUNE
^
SFC
VIDEO IN
L AUDIO IN R VCR 2
8
POWER
MULTI CONTROL
ENTER
TOP MENU
PREV /
RETURN
Change the setting for the DIGITAL IN terminals (OPT1, OPT2,
COAXIAL) on the rear of the unit if the equipment you have
connected is different to that labeled.
MULTI CONTROL
COAXIAL) on the rear of the unit if the equipment you have
connected is different to that labeled.
MULTI CONTROL
1.Press [TOP MENU].
2.Press [
2.Press [
<, >
] to select “SETUP”.
è
[ENTER]
(“D-INPUT” lights.)
è
[ENTER]
3.Press [
<, >
] to select “CD”
(SC-HT07 only)
, “TV”,
“DVR” or “DVD”.
è
[ENTER]
4.Press [
<, >
] to select “NONE”
(SC-HT07 only)
,
“OPT1”, “OPT2” or “COAX”.
è
[ENTER]
The factory settings are:
Note
You can allocate only one piece of equipment per terminal. So
for example if you change “TV” for “OPT1” to “OPT2”, “DVR” will
automatically switch to “OPT1”.
for example if you change “TV” for “OPT1” to “OPT2”, “DVR” will
automatically switch to “OPT1”.
The SLEEP timer can turn the unit off after a set time.
It does not control any other components.
MULTI CONTROL
It does not control any other components.
MULTI CONTROL
1.Press [TOP MENU].
2.Press [
2.Press [
<, >
] to select “SLEEP”.
è
[ENTER]
3.Press [
<, >
] to select the required time.
The display changes as follows:
OFF
OFF
v
30
v
60
v
90
v
120 (minutes)
è
[ENTER]
Remote control
Press [SLEEP].
Press [–/L] or [+/R] to select the required time.
Press [SLEEP].
Press [–/L] or [+/R] to select the required time.
To check the setting
Press [SLEEP] on the remote control once.
The time remaining appears.
To change a setting
Repeat the procedure from the beginning.
Press [SLEEP] on the remote control once.
The time remaining appears.
To change a setting
Repeat the procedure from the beginning.
D-INPUT (Digital input)
Sleep timer
The RESET function
The operation settings for the unit will be initialized to the
settings made at the time of shipment.
However, any preset radio stations will not be erased.
MULTI CONTROL
settings made at the time of shipment.
However, any preset radio stations will not be erased.
MULTI CONTROL
1.Press [TOP MENU].
2.Press [
2.Press [
<, >
] to select “SETUP”.
è
[ENTER]
3.Press [
<, >
] to select “RESET”.
è
[ENTER]
4.Press [
<, >
] to select “YES”.
è
[ENTER]
SC-HT07
CD:
TV:
DVR:
DVD:
TV:
DVR:
DVD:
NONE
OPT1
OPT2
COAX
OPT1
OPT2
COAX
SC-HT05
TV:
DVR:
DVD:
DVR:
DVD:
OPT1
OPT2
COAX
OPT2
COAX
SC-HT07PP-EN.fm Page 21 Friday, May 7, 2004 3:41 PM