Panasonic DP-C354 操作指南
2
1
Turning the Power Switches ON.
Follow the guidelines in this booklet when setting up the machine and installing each software. Please read all
procedures completely before attempting to setup this machine.
procedures completely before attempting to setup this machine.
2
Setting up the Network Configuration.
Setup the Network Configuration using the
Control Panel of the machine. (See pages 4-7)
Control Panel of the machine. (See pages 4-7)
●
●
●
●
●
Network Configuration should be setup by
the System Administrator.
the System Administrator.
3
Installation
■
■
■
■
■ Installing the Printer Driver and
Application Software
Applications selected from the Software
Selection screen will be automatically
installed. (See pages 8-13)
The installation procedure of Printer Driver
for the Network Port Connection is explained
below as an example.
Selection screen will be automatically
installed. (See pages 8-13)
The installation procedure of Printer Driver
for the Network Port Connection is explained
below as an example.
■
■
■
■
■ Printer for USB Port Connection
Installing the Printer Driver onto the USB
Port. (See pages 14-21)
Port. (See pages 14-21)
●
●
●
●
●
This machine is USB 2.0 compliant and backward
compatible with the standard USB revision 1.1.
compatible with the standard USB revision 1.1.
●
●
●
●
●
When connecting the USB Cable, do not turn the
Power Switch of the machine to the ON ( )
position until instructed to do so on the PC screen.
Power Switch of the machine to the ON ( )
position until instructed to do so on the PC screen.
●
●
●
●
●
When connecting to the USB 2.0 port of your
PC, use a USB 2.0 High Speed Cable for better
performance.
PC, use a USB 2.0 High Speed Cable for better
performance.
■
■
■
■
■ Fax Driver
Installing the Fax Driver on your PC.
(See pages 22-24)
Optional Fax Communication Board is
required. (Order Number: DA-FG320 or DA-
FN350)
(See pages 22-24)
Optional Fax Communication Board is
required. (Order Number: DA-FG320 or DA-
FN350)
Turn ON ( ) the Main Power Switch first,
and then turn ON ( ) the Power Switch.
Main Power Switch : Rear of the machine.
Power Switch
and then turn ON ( ) the Power Switch.
Main Power Switch : Rear of the machine.
Power Switch
: Left side of the machine.
Power Switch
Main Power Switch
Connect all Cables and the Power Cord to
the machine.
the machine.
●
●
●
●
●
USB Cable is used for USB Port
connection.
Telephone Cable is used for connecting
the optional Fax Communication Board
(Order Number: DA-FG320 or DA-FN350)
to the telephone line.
connection.
Telephone Cable is used for connecting
the optional Fax Communication Board
(Order Number: DA-FG320 or DA-FN350)
to the telephone line.
USB
Cable
Cable
LAN
Cable
Cable
Telephone
Line Cable
Line Cable
●
●
●
●
●
When connecting the USB Cable, do not
turn the Power Switch of the machine to
the ON ( ) position until instructed to do
so on the PC screen.
turn the Power Switch of the machine to
the ON ( ) position until instructed to do
so on the PC screen.
External
Telephone Cable
Telephone Cable
General Installation Overview
2
1
4
Setting up
■
■
■
■
■ Configure the Shared Setting for
the Network Print Server
■
■
■
■
■ Setting up your Client PC
Connecting the Shared Printer on the
Network Print Server. (See page 31)
Network Print Server. (See page 31)
■
■
■
■
■ Setting up the Completion Notice
A Job Completion Notice will be displayed
on the PC screen when the Copy/Print
Job is completed. (See page 32)
on the PC screen when the Copy/Print
Job is completed. (See page 32)
02_07.pmd
10/11/2006, 08:50
2