Panasonic KXMB781 操作指南
11. Help
70
For assistance, please visit http://www.panasonic.com/help
I cannot hear a dial tone.
L
The telephone line cord is connected to the [EXT] jack on the unit. Connect
to the [LINE] jack (page 15).
to the [LINE] jack (page 15).
L
If you use a splitter/coupler to connect the unit, remove the splitter/coupler
and connect the unit to the wall jack directly. If the unit operates properly,
check the splitter/coupler.
and connect the unit to the wall jack directly. If the unit operates properly,
check the splitter/coupler.
L
Disconnect the unit from the telephone line and connect a known working
telephone. If the working telephone operates properly, contact our service
personnel to have the unit repaired. If the working telephone does not
operate properly, contact your telephone company.
telephone. If the working telephone operates properly, contact our service
personnel to have the unit repaired. If the working telephone does not
operate properly, contact your telephone company.
L
The power cord or telephone line cord is not connected. Check the
connections (page 15).
connections (page 15).
L
If you connected the unit through a computer modem, connect the unit
directly to a telephone line jack.
directly to a telephone line jack.
I cannot make calls.
L
The dialing mode setting may be wrong. Change the setting (feature #120
on page 16).
on page 16).
The unit does not ring.
L
The ringer volume is turned OFF. Adjust it (page 19).
The other party complains
they only hear a fax tone and
cannot talk.
they only hear a fax tone and
cannot talk.
L
FAX ONLY mode is set. Tell the other party the number is only used for
faxes.
faxes.
L
If you use a Distinctive Ring service, make sure you have set the same ring
pattern assigned by the telephone company (page 47).
pattern assigned by the telephone company (page 47).
The {REDIAL} or {PAUSE}
button does not function
properly.
button does not function
properly.
L
If this button is pressed during dialing, a pause will be inserted. If pressed
immediately after a dial tone is obtained, the last number dialed will be
redialed.
immediately after a dial tone is obtained, the last number dialed will be
redialed.
The receiving mode does not
function properly.
function properly.
L
Distinctive Ring is set (feature #430 on page 47).
Whenever I try to retrieve my
voice mail messages, I am
interrupted by the fax tone.
voice mail messages, I am
interrupted by the fax tone.
L
You are probably entering {*} {#} {9}. This is the default setting for the fax
activation code. If you use a voice mail service, turn the fax activation
feature OFF or reprogram the activation code (feature #434 on page 53).
activation code. If you use a voice mail service, turn the fax activation
feature OFF or reprogram the activation code (feature #434 on page 53).
I cannot receive a fax
document on the computer.
document on the computer.
L
Make sure the following features are set beforehand.
–
–
PC fax reception (feature #442 on page 54)
–
Computer setting for the PC fax reception (feature #443 on page 21)
Problem
Cause & Solution
MB271-781-PFQX2722ZA-OI-en.book Page 70 Tuesday, May 22, 2007 5:20 PM