Panasonic KXL-D740 手册

  

         

    

 

 

  

 

  

 

(1) Click Cancel.

After you have confirmed that the PCMCIA controller is running in 32-bit mode, you must install the device drivers
for the CD-ROM Player in Windows 95.
There are two methods for installing the device driver as follows:-

We recommend that you follow "1. How to install the device driver before inserting the supplied Interface
Card ", especially when you wish to install the CD-ROM Player on following computers:-

(A) The computer has only one PC card slot that is connected to floppy disk drive.

(e.g. Toshiba Libretto series, Compaq CONTURA AERO series)

(B) A computer that has SystemSoft CardWorks card manager software installed.

(e.g. Toshiba DynaBook TECRA/Satellite/PORTEGE, Panasonic CF-41)

1.  How to install the device driver before inserting the supplied Interface Card
============================================================
Please ensure that the Interface Card is NOT inserted in the computer's card slot.
(1) Turn on your computer.

Windows 95 automatically starts.

(2) Double-click the Add New Hardware icon in the Control Panel.

The "Add New Hardware Wizard" window appears.

(3) Click Next >.
(4) Select "No", then click Next >.

The hardware option pull-down menu appears.

(5) Select "SCSI controllers ", then click Next >.
(6) Click Have Disk….

The "Install From Disk" window appears.

(7) Insert the Setup disk provided into the computer's floppy disk drive, then click OK.

(8)

Make sure that the "Panasonic KXLC00#" is displayed in the Models dialog box, then click Next
>.

# = Interface Card ID number. (1, 2, 3, 4, 5)

(9) Click Next >.
(10) Click Finish, and remove the Setup disk from the computer.
This completes the driver installation.
Please connect the CD-ROM Player and your computer, refer to the Operating Instructions.