Panasonic KXTU311EBE 操作指南
Note:
R The date and time may be incorrect when
R The date and time may be incorrect when
the battery is dead or replaced. In this case,
set the date and time again.
set the date and time again.
R To adjust the hour for summer time, see
Clock display
You can select how the date and time is
displayed in standby mode from the following
3 options;
– “Large”: Displays only the time in large
displayed in standby mode from the following
3 options;
– “Large”: Displays only the time in large
font.
– “Normal”: Displays the date and time.
– “Off”: Does not display the date or time.
The default setting is “Large”.
– “Off”: Does not display the date or time.
The default setting is “Large”.
1
® ®
2
MbN: “Display” ®
3
MbN: “Clock Display” ®
4
MbN: Select the desired setting.
®
Display font size
You can adjust the size of characters/numbers
shown on the display. The default setting is
“Middle”.
shown on the display. The default setting is
“Middle”.
1
® ®
2
MbN: “Display” ®
3
MbN: “Font Size” ®
4
MbN: Select the desired font size.
Note:
R You can adjust the display font size by
R You can adjust the display font size by
simply pressing M N or M N unless you are
on a call or the phone is ringing for an
incoming call.
on a call or the phone is ringing for an
incoming call.
Profile
You can set the silent mode by pressing
M
M
N for about 2 seconds in standby mode.
Note:
R You can also change the profile setting
R You can also change the profile setting
from the menu tree (page 26).
Key lock
The keypad can be locked to prevent any keys
from being accidentally pressed.
Slide M N (right side of the phone) to lock or
unlock.
from being accidentally pressed.
Slide M N (right side of the phone) to lock or
unlock.
Audible dialling
When you turn this feature on, numbers are
announced when pressing dial keys. The
default setting is “Normal”.
announced when pressing dial keys. The
default setting is “Normal”.
1
® ®
2
MbN: “Sound” ®
3
MbN: “Audible Dialling” ®
4
MbN: Select “Loud”, “Normal”, or “Off”.
®
®
Note:
R The language used for the dial
R The language used for the dial
announcement is the same as the display
language (page 14).
language (page 14).
Telecoil (T-coil) mode
When you activate the Telecoil mode of your
hearing aid, turn this feature “On”. The default
setting is “Off”.
hearing aid, turn this feature “On”. The default
setting is “Off”.
1
®
®
2
MbN: “Telecoil Mode” ®
3
MbN: Select the desired setting.
®
Note:
R When this feature is on, you cannot use the
R When this feature is on, you cannot use the
voice equalizer feature (page 17).
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
15
Getting Started
TU311EBE(en-en)_0901_ver011