Panasonic KXFC238FX 操作指南
3. Preparation
23
Initial Programming
3.7 Dialling mode
If you cannot dial (page 27, 47), change this
setting depending on your telephone service.
setting depending on your telephone service.
L
Change this setting both on the base unit and
on the handset.
on the handset.
3.7.1 With the handset
1
Press {j/OK}.
2
Select “
Base Unit Setup”, then press
{>}
.
3
Enter “
0000” (default base unit PIN).
L
If you changed the PIN, enter it (page 79).
4
Select “
Call Options”, then press {>}.
5
Select “
Dial Mode”, then press {>}.
6
Select the desired setting, then press {>}.
–
–
“
Tone” (default): For tone dial service.
–
“
Pulse”: For rotary pulse dial service.
7
Press {ih}.
3.7.2 With the base unit
1
Press {MENU}.
2
Press {<} or {>} repeatedly to display
“
“
DIALLING MODE”.
3
Press {A} or {B} repeatedly to display the
desired setting.
–
desired setting.
–
“
TONE” (default): For tone dial service.
–
“
PULSE”: For rotary pulse dial service.
4
Press {SET}.
L
The next feature will be displayed.
5
Press {MENU}.
3.8 Date and time
You must set the date and time for both the
handset and the base unit.
Times are set independently and may not
necessarily be identical.
handset and the base unit.
Times are set independently and may not
necessarily be identical.
L
The other party’s fax machine will print the
date and time on each page you send
according to your base unit’s date and time
setting.
date and time on each page you send
according to your base unit’s date and time
setting.
L
The accuracy of the clock is approximately
±60 seconds a month.
±60 seconds a month.
3.8.1 With the handset
Important:
L
Confirm that the power cord of the base
unit is connected.
unit is connected.
L
Ensure that w is not flashing.
L
If a power failure occurs, set the date and
time for the handset again.
time for the handset again.
1
Press {j/OK}.
2
Select “
Handset Setup”, then press {>}.
3
Select “
Time Settings”, then press {>}.
4
Select “
Set Date & Time”, then press
{>}
.
L
The cursor (
|
) will appear on the display.
5
Enter the current date/month/year by
selecting 2 digits for each.
Example: 10 August, 2005
Press {1}{0} {0}{8} {0}{5}.
selecting 2 digits for each.
Example: 10 August, 2005
Press {1}{0} {0}{8} {0}{5}.
{ih}
{j
/OK}
{>}
{<}{>}{A}{B}
{
SET}
{
MENU}
{ih}
{j
/OK}
{<}{>}
Date :10-08-05
Time :00:00
@
=12/24
FC238FX-PFQX2261ZA_en.book Page 23 Monday, June 20, 2005 1:30 PM