Panasonic KXTS730S 操作指南
Recording a conversation
For assistance, please visit http://www.panasonic.com/consumersupport
21
Recording a conversation
The total recording capacity is about 120 minutes.
A maximum of 64 items can be recorded.
A maximum of 64 items can be recorded.
L
If 64 items have been recorded,
conversation recording memory will
become full even if the total recording
become full even if the total recording
time is less than 120 minutes.
1
Press {REC.} ({F1} key), while talking.
L
L
When recording starts, the remaining
recording time will be displayed in
minutes for about 3 seconds.
“-2way recording-” will be
“-2way recording-” will be
displayed while recording.
L
If the remaining recording time is less
than 6 minutes, the IN USE indicators
will flash slowly in amber and green,
and the remaining time will be
and the remaining time will be
displayed as shown below:
*
1
When recording starts, the remaining
recording time will be displayed in seconds
for about 3 seconds.
2
To stop recording, press {STOP}.
L
L
If memory becomes full, “
Memory
full” will be displayed.
Using the AUDIO OUT jack
L
L
Conversations are also routed through
the AUDIO OUT jack. This allows you to
connect recording equipment (cassette
recorder, computer, etc.) and record
recorder, computer, etc.) and record
conversations without using the unit’s
recording memory.
L
Recorded conversations are also routed
through the AUDIO OUT jack during
playback.
playback.
L
Connect “AUX IN” or “LINE IN” jack of
recording equipment using an audio
recording equipment using an audio
cable with a 3.5 mm mono plug.
Playing back a recorded
conversation
When conversations have been recorded,
“
“
” and the total number of recorded
conversations are displayed while the unit
is in standby mode.
is in standby mode.
Press {PLAY} ({F1} key).
L
The unit will play back the new recorded
conversations.
conversations.
L
When you have no new recorded
conversations, the unit will play back all
recorded conversations.
conversations, the unit will play back all
recorded conversations.
L
If the unit has no recorded
conversations, the display will show
“No recordings”, and the unit will go
back to standby mode.
conversations, the display will show
“No recordings”, and the unit will go
back to standby mode.
Note:
L
The current conversation number (for
example, “#1”) is displayed during
playback.
example, “#1”) is displayed during
playback.
Remaining time
Display
less than 6 minutes
→
Remaining:5min
less than 5 minutes
→ Remaining:4min
less than 4 minutes
→ Remaining:3min
less than 3 minutes
→ Remaining:2min
less than 2 minutes
→ Remaining:1min
less than 1 minute*
1
→ Remaining:0min
Many states have imposed regulations
on the manner in which 2-way telephone
conversations may be recorded, so you
conversations may be recorded, so you
should inform the other party that the
conversation is being recorded. Consult
your telephone service provider for
your telephone service provider for
further information.
{<}
{>}
{
STOP}
#1 Play
<
22
>
00:00:01
TS730S.book 21 ページ 2005年6月3日 金曜日 午前9時58分