Panasonic KXFC235E 操作指南

下载
页码 114
3. Preparation
25
Initial Programming
3.7 Date and time
You must set the date and time for both the 
handset and the base unit.
Times are set independently and may not 
necessarily be identical.
L
The other party’s fax machine will print the 
date and time on each page you send 
according to your base unit’s date and time 
setting.
L
The accuracy of the clock is approximately 
±60 seconds a month.
3.7.1 With the handset
Important:
L
Confirm that the mains lead of the base 
unit is connected.
L
Ensure that w is not flashing.
L
If a power failure occurs, set the date and 
time for the handset again.
1
Press {j/OK}.
2
Select 
Handset Setup”, then press {>}.
3
Select 
Time Settings”, then press {>}.
4
Select 
Set Date & Time”, then press 
{>}
.
L
The cursor (
|
) will appear on the display.
5
Enter the current date/month/year by 
selecting 2 digits for each.
Example: 10 August, 2005
Press {1}{0} {0}{8} {0}{5}.
6
Enter the current hour/minute by selecting 2 
digits for each. Press {*} repeatedly to 
select 
AM”“PM”, or 24-hour time entry.
Example: 3:15 PM (12-hour time entry)
1. Press {0}{3} {1}{5}.
2. Press {*} repeatedly to display 
PM”.
7
Press {j/OK}.
8
Press {ih}.
To correct a mistake
Press {<} or {>} to move the cursor to the 
incorrect number, and make the correction.
Note:
L
The date and time on the handset will be lost 
after a power failure and must be reset, but 
the base unit has backup to keep the time.
{ih}
{j
/OK}
{<}{>}
Date :10-08-05
Time :00:00
@
=12/24
Date :10-08-05
Time :03:15
@
=12/24
Date :10-08-05
Time :03:15 PM
@
=12/24
FC235E-PFQX2180YA_en.book  Page 25  Wednesday, April 27, 2005  4:51 PM