Panasonic KX-TH102-M 操作指南
Using a Cellular Phone with this Unit
90
For assistance, please visit http://www.panasonic.com/phonehelp
1
To put the land line call on hold, press
{
{
HOLD}.
2
To make a cellular call
– If you have registered only one
– If you have registered only one
cellular phone, dial the phone
number, then press {CELLULAR}.
number, then press {CELLULAR}.
– If you have registered more than one
cellular phone, dial the phone
number, then press {CELLULAR}.
Select the desired cellular phone,
then press {SET}.
number, then press {CELLULAR}.
Select the desired cellular phone,
then press {SET}.
To answer a cellular call
Press {CELLULAR}.
Press {CELLULAR}.
3
To return to the land line call, press the
line button that is flashing on the base
unit.
line button that is flashing on the base
unit.
L
The cellular call ends.
Cellular settings
Important:
L
You must register your cellular phone to
the base unit before programming.
the base unit before programming.
Ringer settings for cellular calls
Y
o
Ringer volume
You can change the ringer volume heard
when a cellular call is received. You can
change it for the handset and base unit
individually.
You can change the ringer volume heard
when a cellular call is received. You can
change it for the handset and base unit
individually.
1
{
MENU} (F2) i s i {SELECT}
2
“Ringer for cell” i {SELECT}
3
“Ringer volume” i {SELECT}
4
Select the desired volume. (Default:
High) i {SAVE} i {OFF}
High) i {SAVE} i {OFF}
1
{
CELLULAR}
2
“Cellular setting” i {SET}
3
“Ringer volume” i {SET}
4
Select the desired volume. (Default:
High) i {SET} i {STOP}
High) i {SET} i {STOP}
Note for handset and base unit:
L
When the ringer volume is set to off for a
cellular line, “Ringer off” is not
displayed in standby mode and the
handset or base unit does not ring for
cellular calls.
cellular line, “Ringer off” is not
displayed in standby mode and the
handset or base unit does not ring for
cellular calls.
Base unit
Handset
Base unit
TH102-M.book Page 90 Monday, September 11, 2006 4:41 PM