Panasonic KXTGE210FX 操作指南

下载
页码 48
Changing the unit’s region
setting/Resetting the base unit
1
M
N#136
2
MbN: Select the desired country. a MOKN
“Other” = countries except Czech and
Slovakia
“Česká rep.” = Czech
“Slovensko” = Slovakia
3
MbN: “Yes” a MOKN a M
N
Note:
R Changing the unit’s region setting may
cause the settings for your country or your
customised settings to return to their default
settings.
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the
base unit.
Important:
R The additional handset model
recommended for use with this unit is noted
on page 4. If another handset model is
used, certain operations may not be
available.
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the handset
is not registered to the base unit (for example,
 is displayed even when the handset is
near the base unit), re-register the handset.
1
Handset:
M
N#130
2
Base unit:
Press and hold M
N for about 5 seconds.
R If all registered handsets start ringing,
press M
N again to stop, then repeat
this step.
3
Handset:
MOKN a Wait until “Base PIN” is
displayed. a Enter the base unit PIN
(default: “0000”). a MOKN
R If you forget your PIN, contact an
authorised service centre.
Deregistering a handset
A handset can cancel its own registration to
the base unit, or other handsets registered to
the same base unit. This allows the handset to
end its wireless connection with the system.
1
M
N#131
R All handsets registered to the base unit
are displayed.
2
MbN: Select the handset you want to
cancel. a MOKN
3
MbN: “Yes” a MOKN a M
N
Increasing the range of the base
unit
You can increase the signal range of the base
unit by using a DECT repeater. Please use
only the Panasonic DECT repeater noted on
page 3. Contact your Panasonic dealer for
details.
Important:
R Before registering the repeater to this base
unit, you must turn the repeater mode on.
R Do not use more than one repeater at a
time.
Setting the repeater mode
1
M
N#138
2
MbN: Select the desired setting. a MOKN
a M
N
33
Programming
TGE2xxFX(en-en)_0407_ver011.pdf   33
2014/04/07   11:27:50