Panasonic SC-PTX5 操作指南

下载
页码 44
RQ
TX00
19
41
Glos
sar
y
Glossary
CPPM (Content Protection for Prerecorded Media) 
A copy protection system used for DVD-Audio files. This 
unit supports CPPM.
Decoder
A decoder restores the coded audio signals on DVDs to 
normal. This is called decoding.
DivX
DivX is a popular media technology created by DivX, Inc. 
DivX media files contain highly compressed video with 
high visual quality that maintains a relatively small file size.
Dolby Digital
This is a method of coding digital signals developed by 
Dolby Laboratories. Apart from stereo (2-channel) audio, 
these signals can also be 5.1-channel sound. 
Down-mixing
This is a process of remixing the 5.1-channel audio 
(surround sound) on some discs into two channels. When 
you want to listen to the audio on a DVD with a 5.1 
channel digital surround track through your television 
speakers, the down-mixed audio will be output. 
Some DVD-Audio prevent down-mixing of all or part of 
their contents. When playing such discs, or such parts of 
the disc, unless the number of connected speakers is the 
same as the disc’s channel specification, audio will not be 
output properly.
DTS (Digital Theater Systems)
This surround system is used in many movie theaters 
around the world. There is good separation between the 
channels, so realistic sound effects are possible.
Dynamic range
Dynamic range is the difference between the lowest level 
of sound that can be heard above the noise of the 
equipment and the highest level of sound before 
distortion occurs.
Film and video
DVD-Videos are recorded using either film or video. This 
unit can determine which type has been used, then uses 
the most suitable method of progressive output.
Film: Recorded at 25 frames per second (PAL discs) or 
24 frames per second (NTSC discs). (NTSC discs 
recorded at 30 frames per second as well). 
Generally appropriate for motion picture films.
Video: Recorded at 25 frames/50 fields per second (PAL 
discs) or 30 frames/60 fields per second (NTSC 
discs). Generally appropriate for TV drama 
programs or animation. 
Frame still and field still
Frames are the still pictures that go together to make a 
moving picture. There are about 30 frames shown each 
second.
One frame is made up of two fields. A regular television 
shows these fields one after the other to create frames.
A still is shown when you pause a moving picture. A 
frame still is made up of two alternating fields, so the 
picture may appear blurred, but overall quality is high.
A field still is not blurred, but it has only half the 
information of a frame still so picture quality is lower.
HDMI (High-Definition Multimedia Interface)
HDMI is a next-generation digital interface for consumer 
electronic products. Unlike conventional connections, it 
transmits uncompressed digital video and audio signals on 
a single cable. This unit supports high-definition video 
output (720p, 1080i, 1080p) from the HDMI AV OUT 
terminal. To enjoy high-definition video, a high-definition 
compatible television is required.
JPEG (Joint Photographic Experts Group)
This is a system used for compressing/decoding colour 
still pictures. The benefit of JPEG is less deterioration in 
picture quality considering the degree of compression.
Linear PCM (pulse code modulation)
These are uncompressed digital signals, similar to those 
found on CDs. 
MP3 (MPEG Audio Layer 3)
An audio compression method that compresses audio to 
approximately one tenth of its size without any 
considerable loss of audio quality.
MPEG4
A compression system for use on mobile devices or a 
network, that allows highly efficient recording at a low bit 
rate.
Playback control (PBC)
If a Video CD has playback control, you can select 
scenes and information with menus.
Progressive/Interlaced
The PAL video signal standard has 576 interlaced (i) 
scan lines, whereas progressive scanning, called 576p, 
uses twice the number of scan lines. For the NTSC 
standard, these are called 480i and 480p respectively.
Using progressive output, you can enjoy the high-
resolution video recorded on media such as DVD-Video.
Your television must be compatible to enjoy progressive 
video.
Sampling frequency
Sampling is the process of converting the heights of 
sound wave (analog signal) samples taken at set periods 
into digits (digital encoding). Sampling frequency is the 
number of samples taken per second, so larger numbers 
mean more faithful reproduction of the original sound.
WMA (Windows Media
TM
 Audio)
WMA is a compression format developed by Microsoft 
Corporation. It achieves the same sound quality as MP3 
with a file size that is smaller than that of MP3.
0019EB_p28-44.fm  Page 41  Monday, May 21, 2007  11:12 AM