Panasonic DP-C354 操作指南

65

J19

Paper Feed Section & ADU Section
(See pages 66, 67, 69, and 70)

J82, J83, ADU Section & Fuser/Exit Section

J88

J30, J31, Paper Feed Section & Fuser/Exit Section
J38, J39, (See pages 66, 68, 69, and 70)

J40,

J42-J45

J41, J50, Fuser/Exit Section & Paper Transport Section
J51, J52, (See pages 68, and 69)

J86

J80, J81, Fuser/Exit Section

J87

J54-J56 Paper Transport Section

J60-J66 Optional Finisher Section

J70-J79 ADF Section
J92-J94 (See pages 74, and 75)

J00

Sheet Bypass (Remove the misfed paper and
load the paper again)

J01, J11, Paper Tray 1 & Paper Feed Section (Paper

J21

Tray 1-4 & Sheet Bypass) (See page 66)

J02, J12, Paper Tray 2  & Paper Feed Section

J22

(Paper Tray 2) (See page 69)

J03, J13, Paper Tray 3 & Paper Feed Section

J23

(Paper Tray 2-4) (See pages 69, and 70)

J04, J14, Paper Tray 4 & Paper Feed Section

J24

(Paper Tray 3, 4) (See page 70)

J06, J26 Paper Feed Section (Paper Tray 2)

J07, J08, Paper Feed Section
J09, J27, (Paper Tray 2 & Optional Paper Tray 3 & 4)

J28

J18, J33, Paper Feed Section

J35

(Paper Tray 1-4 & Sheet Bypass)
Verify that the media type selection in the control
panel matches the media loaded on the trays.
Ex:Select "Transparency" when Transparencies

are loaded in the Sheet Bypass

●

The display indicates the
section of the misfed paper.
Remove the misfed paper,
and check to see if the
misfeed indicator has been
cleared.
If other locations indicate
presence of paper, remove
them and check the display
again.

●

When clearing a misfed
paper that is difficult, or
impossible to see, switch off
the machine and contact the
authorized Panasonic
dealer.

●

When a misfed paper occurs, the location and the procedures for
removing misfed paper are displayed frame by frame on the Touch
Panel Display.
Check the location, and remove all misfed papers according to
displayed pictures and this manual. (See pages 66-75)

Return to 1st step

006Basic_OP(UK)062_065.pmd

16/11/2006, 13:08

65