Panasonic DP-C354 操作指南
28
Chapter 2 General Settings
Example : Departmental Counter
When the Dept. Counter Mode is selected, you can display your selected departmental counter.
z
To use the Dept. Counter Mode, a special service setting is necessary. Contact your authorized Panasonic
dealer.
dealer.
z
For instruction on how to set departmental counters, refer to Example : Dept. Counter Mode (see page 20).
z
When the departmental counter function is enabled, the password (department code) entry screen appears on
the touch panel display. If you do not enter the password (department code), you cannot use the Copy, Fax,
Scan, and Print function.
the touch panel display. If you do not enter the password (department code), you cannot use the Copy, Fax,
Scan, and Print function.
1
Enter the password (department code)
of the department subject to count
display, and then select “OK”.
of the department subject to count
display, and then select “OK”.
2
Press the Function key.
3
Select “General Settings”.
4
Select “04 Departmental Counter”.
5
Select the counter you want to display.
z
Although the total departmental counter is
displayed on the button, you cannot select
this button.
displayed on the button, you cannot select
this button.
6
After displaying the counter or copy
limit, select “Close”.
limit, select “Close”.
z
After setting up the function(s), press the
Reset key to return the machine to the initial
screen of the current active mode.
Reset key to return the machine to the initial
screen of the current active mode.