Panasonic DP-C354 操作指南
42
Chapter 3 Scanner Settings
Scanning Resolution
You can set the appropriate resolution according to your originals.
z
The standard setting of “Resolution” can be changed, refer to Scanner Settings in the Operating Instructions
(For Function Parameters) on the provided CD-ROM.
(For Function Parameters) on the provided CD-ROM.
z
Resolution settings are reset to their factory defaults when:
-The Reset key is pressed.
-The Auto Reset Time interval has lapsed (default = 1 min).
-The power is turned OFF.
-A scan job is completed.
-The Reset key is pressed.
-The Auto Reset Time interval has lapsed (default = 1 min).
-The power is turned OFF.
-A scan job is completed.
1
Select a desired resolution, and then
select “OK”.
select “OK”.
z
If the above screen is not displayed. (See
page 40, steps 1 to 3)
page 40, steps 1 to 3)
z
Most originals such as photos can be
scanned without problems using the default
resolution (200 dpi), and picture quality level
(Full Colour).
To scan smaller characters (8-point or
smaller) clearly, increase the resolution or
select Adjustment, and then select High
Quality for Compression (Full Colour).
Since the file size increases with higher
resolutions, the transfer time becomes
longer depending on the specifications of
the network, and the computer you are
using.
Ex: The time required to transfer an A4 size
scanned without problems using the default
resolution (200 dpi), and picture quality level
(Full Colour).
To scan smaller characters (8-point or
smaller) clearly, increase the resolution or
select Adjustment, and then select High
Quality for Compression (Full Colour).
Since the file size increases with higher
resolutions, the transfer time becomes
longer depending on the specifications of
the network, and the computer you are
using.
Ex: The time required to transfer an A4 size
colour photo scanned at 600 dpi is three
times as long as that for the same photo
scanned at 200 dpi.
times as long as that for the same photo
scanned at 200 dpi.