B+B SmartWorx Wzzard I/O Sensor Nodes 规格指南
Wzzard™ Intelligent Edge Node
With SmartMesh IP and Bluetooth LE
Wireless Connectivity Where You Need It
The Wzzard™ intelligent wireless sensor platform creates a complete, quick
and easy connectivity stack between your sensors and your application, on your
network or on the Internet. The platform uses Intelligent Edge Nodes, a wireless
802.15.4e SmartMesh IP network to transmit sensor data to the Spectre Network
Gateway. The Spectre Network Gateway can connect to the Internet via wired
connections or the cellular data networks and communicate with application
platforms using the MQTT IoT protocol and JSON data formats.
The Wzzard Intelligent Edge Nodes nodes accommodate virtually any industry-
standard external sensors. Connections can be made via conduit fitting, cable
gland or an M12 connector. The Nodes provide a wide variety of sensor interface
options, including general purpose analog inputs, digital input/output and
thermocouple. They can also contain internal sensors like an accelerometer,
depending upon the model number. All 802.15.4e Wzzard Intelligent Edge Nodes
contain an internal temperature sensor.
Secure, Reliable and Highly Scalable Wireless Networking
The Wzzard platform uses mesh networking and time-synchronized channel
hopping to provide up to 99.999% connectivity, even in the most demanding RF
environments. New nodes may be added at any time, and the SmartMesh IP
network will dynamically self-configure as new nodes are added or removed.
This is a function of the mesh network itself, and does not need to be controlled
by the network gateway.
Easy Configuration and Installation
Configuration of the Wzzard sensor platform is easy via iOS or Android smart
phones or tablets. Using the Wzzard app, your handheld devices can configure
the Wzzard Intelligent Edge Nodes over their Bluetooth LE connections. The
intelligent edge nodes can be configured with calibration and scaling information,
eng. units, friendly names, geolocation and other descriptive information.
The platform simplifies physical installation as well. The Wzzard Intelligent Edge
Nodes can be attached to any surface using screws or their embedded magnetic
bases. The IP66-rated, fiber reinforced polyester PBT housing makes the units
deployable in virtually any industrial or commercial environment.
Intelligence at the Network Edge
The Wzzard wireless platform places intelligence at the network edge. The
Wzzard Intelligent Edge Nodes can be configured to communicate data only
when specified threshold or alert levels are exceeded. When reporting, they
can associate useful information like geo-location, device name and uptime.
This eliminates unnecessary network traffic, eases the processing burden on
upstream resources, and cuts the cost of cellular data plans when the Gateway
is using the cellular data network. Thanks to low-power wireless technology and
programmable time synchronization, the Intelligent Edge Nodes can operate for
multiple years on battery power
• Ultra low power 802.15.4e SmartMesh IP technology
• Communicates with Spectre Network Gateway via highly
scalable and reliable wireless mesh networks
• Connect to industry standard analog or digital sensors
• Wzzard app lets you read or configure the nodes using
Android or iOS tablets and smart phones
• Rugged,
IP66-rated, fiber reinforced polyester PBT enclosure
• MQTT and JSON IoT protocol to application platform
PRODUCT FEATURES
POWER
Internal
(2) 3.6V 2400 mAH Lithium Thionyl Chloride AA
batteries
Battery Life
Multiyear based on 1 min sensor sampling and
reporting
Optional External Input Voltage
3.3 VDC +/- 5%
MECHANICAL
Physical Connection
M12 Connector
1/2” (12.7 mm) Conduit, sensor interface cable
included; 8 wire, 26 gage, 6 ft. (1.8 m)
Sensor Inputs
Analog Input (4-20 mA; 0-5V)
Digital Input (0-48 VDC)
Dgital Input Frequency 1-1K Hz
Digital Input Counter
Integrated Accelerometer 3 Axis
Integrated Temperature
Thermocouple J, K Type
Digital Output (0-30 VDC)
Optional External Antenna
RP-SMA, Omnidirectional, 3.8 dBi, 2.4 GHz
Dimensions 7.64 inches (194 mm)
Mounting
Magnetic mounting via internal magnet
Pull force 4.7 lbs (2.13 kg)
(4) Mounting ears, M5 (#10)
Enclosure
IP66-rated, fiber reinforced polyester PBT
Weight
0.75 lbs (0.34 kg)
TECHNOLOGY
Wireless
802.15.4e, SmartMesh IP
Protocols
MQTT-SN, MQTT, JSON
Bluetooth
Bluetooth 4.0 Low Energy (LE)
LED
Network Connectivity
ENVIRONMENTAL
Installation
Indoor or outdoor
Operating Temperature
-40 to 80°C (-40 to 176°F)
Storage Temperature
-40 to 85°C
Operating Humidity
0 to 95% Non-condensing
WIRELESS SECURITY
Device Authentication
128 bit AES-based encryption with multiple keys
Message integrity check (MIC)
Synchronized key changeovers
Customized key rotation
SPECIFICATIONS
www
.
bb
-
elec
.
com
1
W
ireless
C
onneCtivity