Roxtec CF 32/32 EX Cable Entry Seal Kit 规格指南
Hazardous areas are classified
into zones based on the possibil-
ity of occurrence of an explosive
atmosphere.
into zones based on the possibil-
ity of occurrence of an explosive
atmosphere.
It is the obligation of the owner or
the operator of a facility to ensure
that the zone classification is done
by authorized personnel.
the operator of a facility to ensure
that the zone classification is done
by authorized personnel.
The Roxtec Ex product range
includes a wide variety of seals
to handle different cable sizes
and openings. Our products are
designed and approved for use in
Zone 1 and 2 for gas (incl vapor,
mists) and 21 and 22 for dust.
includes a wide variety of seals
to handle different cable sizes
and openings. Our products are
designed and approved for use in
Zone 1 and 2 for gas (incl vapor,
mists) and 21 and 22 for dust.
Zone classification
Highlighted zones = Permitted zones for Roxtec Ex products
Zone
Zone 0 (gases)
Flammable material present continuously or for long periods
Zone 20 (dust)
Zone 1 (gases)
Flammable material present occasionally in normal operation
Zone 21 (dust)
Zone 2 (gases)
Flammable material present in abnormal conditions only for short periods
Zone 22 (dust)
Highlighted zones = Permitted zones for Roxtec Ex products
Areas, zones, groups and categories
Areas
Classification of
Required marking for electrical equipment
explosion hazard
Equipment group
Category
Mining
Operating
I
M1
Mining
Shutdown
I
M2 or M1
Non-mining
Zone 0
II
1G
Non-mining
Zone 1
II
2G or 1G
Non-mining
Zone 2
II
3G, 2G or 1G
Non-mining
Zone 20
II
1D
Non-mining
Zone 21
II
2D or 1D
Non-mining
Zone 22
II
3D, 2D or 1D
Roxtec R 100 B Ex frame