Moxa EDS-G205A-4PoE Series Switches 规格指南
1
w w w. m o x a . c o m
i n f o @ m o x a . c o m
Industrial Ethernet Solutions
EDS-G205A-4PoE Series
Introduction
The EDS-G205A-4PoE switches are smart, 5-port, unmanaged
full-gigabit Ethernet switches supporting Power-over-Ethernet on
ports 2 to 5. The switches are classified as power source equipment
(PSE), and when used in this way, the EDS-G205A-4PoE switches
enable centralization of the power supply, providing up to 30 watts of
power per port and reducing the effort needed for installing power.
full-gigabit Ethernet switches supporting Power-over-Ethernet on
ports 2 to 5. The switches are classified as power source equipment
(PSE), and when used in this way, the EDS-G205A-4PoE switches
enable centralization of the power supply, providing up to 30 watts of
power per port and reducing the effort needed for installing power.
The switches can be used to power IEEE 802.3af/at standard devices
(PD), eliminating the need for additional wiring, and they support IEEE
802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X
auto-sensing to provide an economical high-bandwidth solution for
your industrial Ethernet network.
(PD), eliminating the need for additional wiring, and they support IEEE
802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X
auto-sensing to provide an economical high-bandwidth solution for
your industrial Ethernet network.
›
Full-gigabit Ethernet ports
›
IEEE 802.3af/at, PoE/PoE+ standards
›
Up to 30 watts output per PoE port
›
24/48 VDC flexible redundant power inputs
›
Intelligent power consumption detection and classification
›
Smart PoE over current and short circuit protection
›
-40 to 75°C operating temperature range (T models)
Specifications
Technology
Standards:
IEEE 802.3af/at for Power-over-Ethernet
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow Control
Processing Type: Store and Forward
IEEE 802.3af/at for Power-over-Ethernet
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow Control
Processing Type: Store and Forward
Switch Properties
MAC Table Size: 8 K
Packet Buffer Size: 136 KB
Packet Buffer Size: 136 KB
Interface
1000Base-X (SFP slot)
RJ45 Ports: 10/100Base-T(X), 1000Base-T auto negotiation speed,
Full/Half duplex mode, and auto MDI/MDI-X connection
LED Indicators: P1, P2, 10/100/1000M, PoE
RJ45 Ports: 10/100Base-T(X), 1000Base-T auto negotiation speed,
Full/Half duplex mode, and auto MDI/MDI-X connection
LED Indicators: P1, P2, 10/100/1000M, PoE
Power Requirements
Input Voltage: 24/48 VDC, redundant inputs
Input Current: Max 7.5 A @ 24 VDC (supports up to 4 ports at 30
watts per PoE port)
Overload Current Protection: Present
Connection: 2 removable 2-contact terminal blocks
Reverse Polarity Protection: Present
Input Current: Max 7.5 A @ 24 VDC (supports up to 4 ports at 30
watts per PoE port)
Overload Current Protection: Present
Connection: 2 removable 2-contact terminal blocks
Reverse Polarity Protection: Present
Physical Characteristics
Housing: Metal, IP30 protection
Dimensions: 29 (W) x 135 (H) x 105 (D)
Weight: 300 g
Dimensions: 29 (W) x 135 (H) x 105 (D)
Weight: 300 g
Installation: DIN-Rail mounting, wall mounting (with optional kit)
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Standards and Certifications
Safety: UL 508 (Pending)
EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS:
EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4, EN 61000-4-5 (Surge) Level 4,
EN 61000-4-6 (CS) Level 3, EN 61000-4-8
Rail Traffic: EN 50121-4 (Pending)
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS:
EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4, EN 61000-4-5 (Surge) Level 4,
EN 61000-4-6 (CS) Level 3, EN 61000-4-8
Rail Traffic: EN 50121-4 (Pending)
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Note: Please check Moxa’s website for the most up-to-date certification status.
MTBF
(mean time between failures)
Time: TBD
Database: Telcordia (Bellcore), GB
Database: Telcordia (Bellcore), GB
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Details: See www.moxa.com/warranty
5-port IEEE 802.3af/at PoE+ unmanaged full gigabit Ethernet switches