Moxa EDS-P506A-4PoE PoE+ Series Switches 规格指南
1
w w w. m o x a . c o m
i n f o @ m o x a . c o m
Industrial Ethernet Solutions
EDS-P506A-4PoE Series
Introduction
The EDS-P506A-4PoE series managed redundant Ethernet switches
come standard with 4 10/100BaseT(X) 802.3at (PoE+) and 802.3af
(PoE) compliant Ethernet ports and 2 10/100BaseT(X) or 2
10/100BaseFX Ethernet ports. The EDS-P506A-4PoE switches provide
up to 30 watts of power per PoE port, and allow power to be supplied
come standard with 4 10/100BaseT(X) 802.3at (PoE+) and 802.3af
(PoE) compliant Ethernet ports and 2 10/100BaseT(X) or 2
10/100BaseFX Ethernet ports. The EDS-P506A-4PoE switches provide
up to 30 watts of power per PoE port, and allow power to be supplied
Advanced PoE management function (PoE port setting, PD failure
•
check, and PoE scheduling)
24/48 VDC wide range redundant power inputs
24/48 VDC wide range redundant power inputs
•
Command Line Interface (CLI) for quickly configuring major
•
managed functions*
IEEE 1588 PTP V2* (Precision Time Protocol) for precise time
IEEE 1588 PTP V2* (Precision Time Protocol) for precise time
•
synchronization of networks
Support EtherNet/IP* and Modbus/TCP protocols for device
Support EtherNet/IP* and Modbus/TCP protocols for device
•
management and monitoring
Compatible with EtherNet/IP and PROFINET protocols for
Compatible with EtherNet/IP and PROFINET protocols for
•
transparent data transmission
4 IEEE 802.3af/at compliant PoE and Ethernet combo ports
›
Up to 30 watts per PoE port
›
24/48 VDC wide range redundant power inputs
›
Advanced PoE management functions, including PD failure check
›
and PoE scheduling
Turbo Ring, Turbo Chain, RSTP/STP, and MSTP* for network
›
redundancy
-40 to 75°C operating temperature range (T models)
›
*Available in Q3, 2011
Specifications
6-port IEEE 802.3af/at PoE+ managed Ethernet switches
to connected high-power devices when AC power is not readily
available or is cost-prohibitive to provide locally. The EDS-P506A-
4PoE series series is designed especially for security automation
applications such as IP surveillance, and gate of entry systems, which
can benefit from a scalable backbone construction and Power-over-
Ethernet support.
available or is cost-prohibitive to provide locally. The EDS-P506A-
4PoE series series is designed especially for security automation
applications such as IP surveillance, and gate of entry systems, which
can benefit from a scalable backbone construction and Power-over-
Ethernet support.
Turbo Ring and Turbo Chain (recovery time < 20 ms), RSTP/STP,
•
and MSTP* for network redundancy
IGMP snooping and GMRP for filtering multicast traffic
IGMP snooping and GMRP for filtering multicast traffic
•
Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network
•
planning
QoS (IEEE 802.1p/1Q) and TOS/DiffServ to increase determinism
QoS (IEEE 802.1p/1Q) and TOS/DiffServ to increase determinism
•
Port Trunking for optimum bandwidth utilization
•
TACACS+*, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance
•
network security
*Available in Q3, 2011
Features and Benefits
Technology
Standards:
IEEE 802.3af/at for Power-over-Ethernet
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3x for Flow Control
IEEE 802.1D-2004 for Spanning Tree Protocol*
IEEE 802.1w for Rapid STP
IEEE 802.1s for Multiple Spanning Tree Protocol*
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
Protocols: IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/
Client, DHCP Option 66/67/82, BootP, TFTP, SNTP, SMTP, RARP,
RMON, HTTP, HTTPS, Telnet, SSH, Syslog, EtherNet/IP*, Modbus/
TCP, SNMP Inform, LLDP, IEEE 1588 PTP V2*, IPv6, NTP Server/
Client*
MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB,
Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control: IEEE 802.3x flow control, back pressure flow control
*Available in Q3, 2011
Switch Properties
Priority Queues: 4
Max. Number of Available VLANs: 64
VLAN ID Range: VID 1 to 4094
IGMP Groups: 256
MAC Table Size: 8 K
Packet Buffer Size: 1 Mbit
Interface
Fiber Ports: 100BaseFX ports (SC/ST connector)
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex
mode, and auto MDI/MDI-X connection
Console Port: RS-232 (RJ45 connector)
DIP Switches: Turbo Ring, Master, Coupler, Reserve
LED Indicators: PWR1, PWR2, FAULT, 10/100M, MSTR/HEAD, CPLR/
TAIL, PoE
Alarm Contact: 2 relay outputs with current carrying capacity of 1 A @
24 VDC
Digital Inputs: 2 inputs with the same ground, but electrically isolated
from the electronics.
• +13 to +30V for state “1”
• -30 to +3V for state “0”
• Max. input current: 8 mA
Award-winning Product