DEHN - Surge Protection 920 300 SPD Base 规格指南
page1©2007 DEHN + SÖHNE GmbH + Co. KG Hans-Dehn-Str. 1 Postfach 1640 D-92306 Neumarkt, Germany, Tel. +499181 906-0 www.dehn.de, as at: 2007-04-03
INFORMATION TECHNOLOGY SYSTEMS
BLITZDUCTOR® XT Base Part
PLUGGABLE SPDS FOR DIN RAIL MOUNTING
BXT BAS
Dimension drawing BXT BAS
Basic circuit diagram with and without plugged
-in module
BLITZDUCTOR XT base part, very space-saving universal feed-through terminal for supporting
SPD modules without signal interruption. The SPD module is safely earthed by the supporting
foot of the DIN rail by means of a snap-in fixing device. As no components of the protective
circuit are situated in the base part, maintenance work is only required for the protection
modules.
4-pole device and for universal use with all
types of surge arrester modules
Plugging and removing of the surge arrester
modules without signal interruption
Universal design without protective
components
BXT BAS
Operating temperature range
-40°C...+80°C
Degree of protection
IP 20
Mounting on
35 mm DIN rail acc. to EN 60715
Connection input / output
screw / screw
Cross-sectional area, solid
0.08 - 4 mm2
Cross-sectional area, flexible
0.08 - 2.5 mm2
Tightening torque (terminals)
0.4 Nm
Earthing by
35 mm DIN rail acc. to EN 60715
Enclosure material
polyamide PA 6.6
Colour
yellow
Ordering information
Type
Type
BXT BAS
Part No.
920 300
Packing unit
1pcs.
Change in form and technology, with masses, weights and materials we reserve ourselves in the sense of the progress of the technology. The illustrations are noncommittal.