Cisco 7000 SERIES PA 8 PORT T1 MC ADAPTER WITH CSU DSU 规格指南

Cisco 7204VXR and 
Cisco 7206VXR

Cisco IOS Release 12.0(3)T or a later release of Cisco IOS Release 12.0 T
Cisco IOS Release 12.0(1)XE or a later release of Cisco IOS Release 12.0 XE
Cisco IOS Release 12.2(4)B or a later release of Cisco IOS Release 12.2 B

Cisco 7204 and Cisco 7206

Cisco IOS Release 11.1(20)CC or a later release of Cisco IOS Release 11.1 CC
Cisco IOS Release 12.2(4)B or a later release of Cisco IOS Release 12.2 B

Cisco 7202

Cisco IOS Release 11.1(9)CA1 or a later release of Cisco IOS Release 11.1 CA
Cisco IOS Release 11.3(4)AA or a later release of Cisco IOS Release 11.3 AA
Cisco IOS Release 12.2(4)B or a later release of Cisco IOS Release 12.2 B

Cisco uBR7246 and 
Cisco uBR7223

Cisco IOS Release 12.0(5)T or a later release of Cisco IOS Release 12.0 T

Cisco IOS Release 12.2(11)YZ or a later release of Cisco IOS Release 12.2YZ

With Cisco 7304 PCI Port Adapter 
Carrier Card

Cisco IOS Release 12.2(14)SZ or a later release of Cisco IOS Release 12.2SZ

Cisco IOS Release 12.2(1)DX or a later release of Cisco IOS Release 12.2 DX
Cisco IOS Release 12.2(4)B or a later release of Cisco IOS Release 12.2 B

Cisco IOS Release 11.1(22)CC or a later release of Cisco IOS Release 11.1 CC

Cisco IOS Release 11.1(22)CC or a later release of Cisco IOS Release 11.1 CC

Cisco IOS Release 12.0(10)S or a later release of Cisco IOS Release 12.0 S

Cisco IOS Release 12.0(10)S or a later release of Cisco IOS Release 12.0 S

1.

The Catalyst RSM/VIP2-40(=), which has 2 MB of SRAM and 32 MB of DRAM, supports two installed multichannel DS1/PRI port adapters that are 
running ISDN PRI with distributed services or channelized T1 with distributed switching or distributed services. It also supports two installed 
multichannel DS1/PRI port adapters that are running ISDN PRI or channelized T1 with distributed services.

2.

The PA-MC-4T1 is supported only with the Cisco IOS for the Catalyst 6000 Family Switches product on both the Supervisor Engine 2 and the MSFC

3.

MSFC = Multilayer Switch Feature Card

4.

Cisco 7200 series routers require a minimum of 32 MB of DRAM to support up to five installed multichannel DS1/PRI port adapters that are running 
ISDN PRI or channelized T1.

5.

The multichannel DS1/PRI port adapters can be used in the VIP2 and VIP4 in all Cisco 7500 series routers and Cisco 7000 series routers that use the 
RSP7000 and RSP7000CI, and in Cisco 7200 series routers and Cisco uBR7200 series routers.

6.

The multichannel DS1/PRI port adapter requires that the host Cisco 7000 series, Cisco 7200 series, or Cisco 7500 series router be running Cisco IOS 
Release 11.1(20)CC or a later release of Cisco IOS Release 11.1 CC.