Nikon D750 Kit 业主指南

158

Check the results.
If the camera was able to measure 
a value for white balance, 

C 

will flash in the control panel for 
about six seconds, while the 
viewfinder will show a flashing 

a.

If lighting is too dark or too bright, 
the camera may be unable to 
measure white balance. A flashing 
b a will appear in the control 
panel and viewfinder for about six 
seconds. Press the shutter-release 
button halfway to return to Step 5 
and measure white balance again.

D

If no operations are performed during viewfinder photography while 
the displays are flashing, direct measurement mode will end in the 
time selected for Custom Setting c2 (Standby timer, 

A

Selecting Preset manual for the White 
balance option in either of the shooting 
menus displays the dialog shown at right; 
highlight a preset and press 

J. If no value 

currently exists for the selected preset, white 
balance will be set to 5200 K, the same as 
Direct sunlight.