Alpine INE-W960HDMI 业主指南
34
-EN
Installation Setup
[Installation] is selected on the General setup menu in step 3. See
“General Setup Operation” (page 30).
“General Setup Operation” (page 30).
Setting item: Installation
The Installation check screen is displayed.
The Installation check screen is displayed.
Demonstration Setup
[Demo mode] is selected on the General setup menu in step 3. Refer to
“General Setup Operation” (page 30).
“General Setup Operation” (page 30).
This unit has a Demonstration feature for the display. When you install
and use the unit for the first time, the unit will enter demo mode
automatically. To quit demo mode, set Demo mode to Off.
and use the unit for the first time, the unit will enter demo mode
automatically. To quit demo mode, set Demo mode to Off.
Setting item: Demo mode
Setting contents: Off / On (Initial setting)
Setting contents: Off / On (Initial setting)
• If you perform an operation during the Demo mode, the
demonstration is temporarily stopped.
Sound Setup Operation
1
Touch [Setup] icon of Top banner.
The Setup main screen is displayed.
2
Touch [Sound].
The Sound Menu screen appears.
3
Select the desired item.
Setting items: Car Specific Sound Setup* / Media Xpander* /
EQ Presets* / Quick Sound /
TCR (Time Correction) / X-Over* /
Parametric EQ* / Other / Defeat*
TCR (Time Correction) / X-Over* /
Parametric EQ* / Other / Defeat*
* When BASS ENGINE SQ of Quick Sound Setup is set to “On,” the
message “This function cannot be used now. Please check Sound
APP connection and BASS ENGINE SQ settings.” will be displayed.
This setting cannot be selected.
APP connection and BASS ENGINE SQ settings.” will be displayed.
This setting cannot be selected.
Setting Demo mode to Off/On
Sound Setup
To display the Sound Setup Menu screen:
Your vehicle must be parked with the ignition key in the ACC or
ON position. To do this, follow the procedures below.
Your vehicle must be parked with the ignition key in the ACC or
ON position. To do this, follow the procedures below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Release the parking brake (for your safety, operate
while depressing the foot brake pedal).
3 Engage the parking brake again.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the Sound mode operation has been
released. Engaging the parking brake can reactivate the Sound
Setup Menu, as long as the car’s ignition has not been turned off.
It is not necessary to repeat the above procedure
(1 through 3) of “To display the Sound mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the Sound mode screen.”
released. Engaging the parking brake can reactivate the Sound
Setup Menu, as long as the car’s ignition has not been turned off.
It is not necessary to repeat the above procedure
(1 through 3) of “To display the Sound mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the Sound mode screen.”
The following steps 1 to 5 are common operations to each
“Setting item” of Sound Setup. Refer to each section for details.
“Setting item” of Sound Setup. Refer to each section for details.