Nikon KeyMission 80 业主指南

SB6K01(11)

Read this guide for information on using SnapBridge for Wi-Fi connections on iOS devices.

The Wi-Fi prompt is displayed when:
•  SnapBridge switches from Bluetooth to Wi-Fi. 

SnapBridge automatically switches between 
Bluetooth and Wi-Fi to save power.  The Wi-Fi 
prompt is displayed when SnapBridge switches 
from Bluetooth to Wi-Fi.  Note that SnapBridge 
may need a few seconds to switch to Wi-Fi after 
you perform such operations as selecting remote 
photography in the Camera tab.

•  SnapBridge detects the camera after losing the Wi-Fi 

connection.  The connection will be lost when 
your iOS device locks or the camera enters 
sleep mode, in which case your device may 
automatically connect to another network. 
The Wi-Fi prompt will be displayed as needed 
when SnapBridge detects the camera again. 
The Wi-Fi connection may also be lost due to 
strong interference or as a result of exiting the 
SnapBridge Camera tab.

•  The Bluetooth® word mark and logos are 

registered trademarks owned by Bluetooth 
SIG, Inc. and any use of such marks by Nikon 
Corporation is under license.

•  iOS is a trademark or registered trademark of 

Cisco Systems, Inc., in the United States and/or 
other countries and is used under license.

•  Wi-Fi and the Wi-Fi logo are trademarks or 

registered trademarks of the Wi-Fi Alliance.

A Wi-Fi prompt will be displayed when SnapBridge 
requires a Wi-Fi connection.  Follow the steps 
below to connect to the camera via Wi-Fi.

Tap Go when prompted.

Tap < Settings to display 
iOS settings.

Tap Wi-Fi.

Tap KM80_XXXXXXXX.

Enter the camera 
password if prompted 
(the default password is 
“NikonKeyMission”).

D

We recommend that you change the default password 
to protect your privacy.  The password can be changed 
by pressing the camera 

G

 button to view the Home 

display and selecting Camera settings > Network 
menu > Wi-Fi > Network settings in the 

 (setup) 

menu.