Illusion Audio Luccent L6 CX 业主指南
CARBON / LUCCENT COAXIALS PG 02
ILLUSIONAUDIO-AMERICA.COM
SINGLE AMPLIFIER SYSTEMS
The objective behind a single amplifier system is simplicity.
By choosing this route the installer can run minimum components and achieve excellent sound quality. A single
two channel amplifier will drive both the mid bass and tweeters; eliminating the need for an additional amplifier and
installation time, thus reducing the cost.
two channel amplifier will drive both the mid bass and tweeters; eliminating the need for an additional amplifier and
installation time, thus reducing the cost.
1. The amplifier will need to be connected to either the crossover mid-bass input (TIN) or the midbass input (WIN).
2. The internal switch will need to be set to single amp.
3. Connect the crossover mid-bass output to the mid-bass driver.
4. Connect the crossover tweeter output to the tweeter.
5.
2. The internal switch will need to be set to single amp.
3. Connect the crossover mid-bass output to the mid-bass driver.
4. Connect the crossover tweeter output to the tweeter.
5.
The internal jumpers control the tweeters output level. With 3 selectable jumpers we have the options of -
1db, -2db,
and -3db.
These can be added together so you will have up to
-6db
. If you want
-4db
as an example, you would
turn on the
-1db & -3db
which will give you
-4db
of tweeter attenuation.
BI-AMPLIFIED SYSTEM
The objective behind a dual amplifier system is added tuning flexibility.
By choosing this route the installer can use two amplifiers or a single four-channel amplifier to achieve improved sound
quality. Each driver will have its own amplifier channel, the mid-bass and tweeter levels may be easily adjusted at the
amplifier. Increased sound quality may be achieved by supplying each driver with the proper amount of power.
quality. Each driver will have its own amplifier channel, the mid-bass and tweeter levels may be easily adjusted at the
amplifier. Increased sound quality may be achieved by supplying each driver with the proper amount of power.
1. The mid-bass amplifier output will connect to the crossover mid-bass input. (WIN)
2. The tweeter amplifier output will connect the crossover tweeter input. (TIN)
3. The internal switch must be set to bi-amp.
4. Connect the crossover mid-bass output to the mid-bass speaker.
5. Connect the crossover tweeter output to the tweeter.
6. Adjust the tweeter and mid-bass levels at the amplifier.
7. The crossover tweeter level jumpers should remain in the off settings.
2. The tweeter amplifier output will connect the crossover tweeter input. (TIN)
3. The internal switch must be set to bi-amp.
4. Connect the crossover mid-bass output to the mid-bass speaker.
5. Connect the crossover tweeter output to the tweeter.
6. Adjust the tweeter and mid-bass levels at the amplifier.
7. The crossover tweeter level jumpers should remain in the off settings.
INSTALLATION OPTIONS
1
2