ONKYO TX-RZ810 业主指南

Troubleshooting | Appendix

You can quickly adjust settings you frequently use, such as 

tone adjustments, etc.

Operation:

You can make the settings on the TV screen while playing 

something. Press Q on the remote controller to display the 

Quick Menu.

Quick Menu
Tone
Level
AccuEQ
Other

Bass
Treble

BD/DVD

Select the item with the cursor  /  buttons of the remote 

controller and press ENTER to confirm your selection.

Use the cursors to change the settings.

•  To return to the previous screen, press  .

•  To exit the settings, press Q.

■ Tone

Bass:

Enhance or moderate the bass range of the front speakers.
Treble:

Enhance or moderate the treble range of the front speakers.

•  It cannot be set if the listening mode is Pure Audio, 

Direct or THX.

■ Level

Center:

Adjust the speaker level of the center speaker while 

listening to some sound.

Subwoofer:

Adjust the speaker level of the subwoofer while listening to 

some sound.

•  The adjustment you made will be reset to the previous 

status when you turn the unit to standby mode.

■ AccuEQ

AccuEQ Room Calibration:

Enable or disable the equalizer function that corrects for 

distortion caused by the acoustic environment of the room. 

If this is to be enabled, then normally you should select 

"On (All Ch)", and to disable just the front speakers you 

should select "On (ex. L/R)". The setting can be separately 

set to each input selector.
Equalizer:

Select "Preset 1" to "Preset 3" configured in "2. Speaker" - 

"Equalizer Settings" in the Setup menu. The same sound 

field setting is applied all ranges when set to "Off".
Re-EQ, Re-EQ(THX):

Adjust the soundtrack that was processed to enhance 

its high pitch range, in order to make it suitable for home 

theater. 

In Re-EQ, the following listening modes can be used: 

Dolby Digital, Dolby Digital Plus, Dolby Surround, Dolby 

TrueHD, Multichannel, DTS, DTS-ES, DTS 96/24, DTS-

HD High Resolution Audio, DTS-HD Master Audio, DTS 

Neural:X, DTS Express, Neo:6 Cinema, and DSD. 

In Re-EQ(THX), the following listening modes can be 

used: THX Cinema, THX Surround EX, and THX Select2 

Cinema.

•  It cannot be set if the listening mode is Pure Audio or 

Direct.

■ Other

Speaker Layout :

When you have connected surround back speakers and 

height speakers at the same time, you can switch output.

•  Changes may not be possible depending on the 

speaker settings.

A/V Sync :

If the video is behind the audio, you can delay the audio to offset 

the gap. Different settings can be set for each input selector.

•  It cannot be set if the listening mode is Pure Audio or 

Direct.

Music Optimizer:

Improve the quality of the compressed audio. Playback 

sound of lossy compressed files such as MP3 will be 

improved. The setting can be separately set to each input 

selector. The setting is effective in the signals of 48 kHz or 

less. The setting is not effective in the bitstream signals.

•  It cannot be set if the listening mode is Pure Audio or 

Direct.

Late Night:

Make small sounds easily heard. It is useful when you 

need to reduce the volume while watching a movie late 

night. You can enjoy the effect only when playing Dolby 

series and DTS series input signals.

•  The setting cannot be used in the following cases.

–  If "Loudness Management" is set to "Off" when 

playing Dolby Digital Plus or Dolby TrueHD

–  When the input signal is DTS and "Dialog Control" is 

other than 0 dB

Center Spread:

Adjust the width of the sound field of the front channel 

when playing in the Dolby Surround listening mode. To 

spread the width of the sound field to the left and right, set 

to "On". To concentrate sound in the center, set to "Off".

•  Depending on the speaker settings, this becomes "Off".

Dialog Control:

You can increase the dialog portion of the audio in 1 dB 

steps up to 6 dB so that you can make dialog easier to 

hear over background noise.

•  This cannot be set for content other than DTS:X.

•  We plan to provide support for the DTS:X audio format 

through a firmware update for this unit. Center Image is 

displayed until the update.

•  The effect may not be selectable with some content.

HDMI Out:

Allows you to select the HDMI jack to output video signals 

from "MAIN", "SUB", and "MAIN+SUB".