Marantz SR5012 业主指南

Set Audyssey MultEQ

®

 XT, Audyssey Dynamic EQ

®

 and Audyssey

Dynamic Volume

®

. These can be selected after Audyssey

®

 Setup has

been performed.
For additional information on Audyssey technology, please see

0

“MultEQ

®

 XT”, “Dynamic EQ”, “Reference Level Offset” and “Dynamic Volume”

settings are stored for each input source.

0

When the sound mode is in the “Direct” or “Pure Direct” mode, “MultEQ

®

 XT”,

“Dynamic EQ” and “Dynamic Volume” settings cannot be configured.

0 This cannot be set when the input mode is set to “7.1CH IN”.

o MultEQ

MultEQ

®

 XT compensates for both time and frequency characteristics

of the listening area based on Audyssey

®

 Setup measurement results.

Selection is done from three types of compensation curves. We

recommend the “Reference” setting.

(Default):

Selects the default calibrated setting with

a slight roll off at high frequencies, which

is optimized for movies.

Selects the reference setting, but
bypasses MultEQ

®

 XT on the front left

and right speakers.

Selects the calibrated setting which is

optimized for small rooms where your

listening position is closer to the

speakers.

Do not use “MultEQ

®

 XT”.

0

When using headphones, “MultEQ

®

 XT” is automatically set to “Off”.

154