Sony HT-NT5 业主指南

57

US

[Wired Setup]: Select this when you 
connect to a broadband router using a 
LAN cable. When you select this setting, 
the wireless LAN function of the system 
is disabled automatically.
[Wireless Setup]: Select this when you 
use the built-in Wi-Fi function of the 
system to connect to a wireless 
network.

For further details, visit the following 
website and check the FAQ:
http://www.sony.com/soundbarsupport

[Network Connection Status]
Displays the current network 
connection status.

[Network Connection Diagnostics]
You can run the network diagnostic to 
check if the network connection has 
been made properly.

[Screen mirroring RF Setting]
If you use multiple wireless systems, 
such as a wireless LAN, the wireless 
signals may be unstable. In this case, 
playback stability may be improved by 
setting the priority radio frequency 
channel for Screen mirroring.
[Auto]: Normally select this. The system 
automatically selects the best channel 
for Screen mirroring.
[CH 1]/[CH 6]/[CH 11]: The selected 
channel is prioritized for Screen 
mirroring connection.

[Connection Server Settings]
Sets whether or not to display the 
connected home network server.

[Auto Home Network Access 
Permission]
[On]: Allows automatic access from a 
newly detected home network 
controller.
[Off]: Off

[Home Network Access Control]
Displays a list of home network 
controller-compatible products and sets 
whether or not to accept commands 
from the controllers in the list.

[External Control]
[On]: Allows the home automation 
controller to operate this system.
[Off]: Off

[Remote Start]
[On]: Allows you to turn on the system 
by a device linked via a network when 
the system is in standby mode.
[Off]: The system cannot be turned on 
by a device linked via a network.

The skip setting is a convenient feature 
that allows you to skip unused inputs 
when selecting a function by pressing 
INPUT +/–.
[Do not skip]: The system does not skip 
the selected input.
[Skip]: The system skips the selected 
input.

When you press INPUT +/– during the 
home menu is displayed, input icon 
appears dimmed if it has been set to [Skip].

You can perform [Input Skip Setting] from 
the options menu (page 59).

Run [Easy Setup] to make the basic 
initial settings and the basic network 
settings for the system. Follow the on-
screen instructions.