MartinLogan Motion® Vision X 业主指南

22

NAVIGATING THE MENU**
The menu is navigated using the ‘up/down/left/
right/enter’ navigation system. Up and Down are 
used to cycle through the menu and submenu options. 
Right or Enter are used to access a submenu or to 
select an option. Left is used to exit a submenu and 
go back one level (fig. 10 and fig. 11).

SUB: Enter the ‘SUB’ submenu by pressing the enter 
button. Here you may configure external subwoofer 
integration.  Please note: When integrating 
an external subwoofer, you must choose either a 
wireless connection or a wired connection. Your 
soundbar does not simultaneously output via both 
connections. The soundbar can connect to only one 
wireless subwoofer. However, it is possible to con-
nect multiple wired subwoofers if you utilize a ‘Y’ 
splitter attached to the subwoofer cable, or if your 
subwoofer offers an output designed to daisy chain 
multiple subs.

SUB > NO.SUB: This option configures the 
soundbar to handle all bass information and will 
not output information via the subs wired or wire-
less subwoofer connections. Activate by pressing 
the enter button and the soundbar will respond 
with ‘SET’.

SUB > WIRED: This option configures the sound-
bar to use an external subwoofer connected via a 
cable to the soundbar’s Sub Out RCA connection. 
Activate by pressing the enter button and the sound-
bar will respond with ‘SET’. With this option, the 
wireless sub transmitter is turned off. 

Reference your subwoofer’s manual to learn how to 
properly adjust the sub’s level and phase controls 
to achieve proper blending with the soundbar. The 
subwoofer’s crossover should be set to “bypass” or 
“LFE”. For subwoofers that do not have a “bypass” 

or “LFE” crossover setting, we recommend adjusting 
the crossover to its highest setting.

SUB > WIRELS: [WIRELESS] Enter the ‘SUB 
> WIRELS’ submenu by pressing the enter button. 
Here you can sync the soundbar with a compatible 
wireless subwoofer.

Reference your subwoofer’s manual to learn how to 
properly adjust the sub’s level and phase controls 
to achieve proper blending with the soundbar. The 
subwoofer’s crossover should be set to “bypass” or 
“LFE”. For subwoofers that do not have a “bypass” 
or “LFE” crossover setting, we recommend adjusting 
the crossover to its highest setting.