MartinLogan Motion® Vision X 业主指南
26
• ANALOG [ANALOG INPUT] (direct access)
• PLAYFI [Play-Fi INPUT] (direct access)
• PLAYFI [Play-Fi INPUT] (direct access)
Choose the command you want to program and
press the enter button. The soundbar will respond with
‘PUSH.BTN’. Hold the second remote approximately
12 inches (30cm) from the soundbar and press the
appropriate button four times.
press the enter button. The soundbar will respond with
‘PUSH.BTN’. Hold the second remote approximately
12 inches (30cm) from the soundbar and press the
appropriate button four times.
If the new command is learned successfully, the
soundbar’s display will display “SET”. If the new
command is not learned, the soundbar will display
“FAILED”. Repeat the process if learning fails.
soundbar’s display will display “SET”. If the new
command is not learned, the soundbar will display
“FAILED”. Repeat the process if learning fails.
LEARN > ERASE: Enter the ‘ERASE’ submenu
by pressing the enter button. Erasing will clear
programming for the second remote. The ‘ERASE’
function requires confirmation.
by pressing the enter button. Erasing will clear
programming for the second remote. The ‘ERASE’
function requires confirmation.
LEARN > ERASE > CONFIRM: Enter the
‘CONFIRM’ submenu by pressing the enter button.
‘CONFIRM’ submenu by pressing the enter button.
LEARN > ERASE > CONFIRM > NO: Activate
by pressing the enter button. Choosing this option
will exit without erasing the remote programming.
by pressing the enter button. Choosing this option
will exit without erasing the remote programming.
LEARN > ERASE > CONFIRM > YES:
Activate by pressing the enter button. The soundbar
will respond with ‘ERASED’. After the remote codes
are erased, there is no way to recover the previous
user-configured settings.
Activate by pressing the enter button. The soundbar
will respond with ‘ERASED’. After the remote codes
are erased, there is no way to recover the previous
user-configured settings.
MENU OPTION: SOURCE NAME
SRC.NAM: [SOURCE NAME] Enter the ‘SRC.
NAM’ submenu by pressing the enter button. The
settings in this menu will allow you to assign new
names to display on the soundbar when changing
inputs. For example, you can program the ‘OPTIC’
input to display ‘DVD’.
NAM’ submenu by pressing the enter button. The
settings in this menu will allow you to assign new
names to display on the soundbar when changing
inputs. For example, you can program the ‘OPTIC’
input to display ‘DVD’.
Using the up/down directional buttons, you can
select and program the following input names:
select and program the following input names:
• OPTIC [DIGITAL OPTICAL]
• COAX [DIGITAL COAXIAL]
• ANALOG [LEFT/RIGHT ANALOG]
• COAX [DIGITAL COAXIAL]
• ANALOG [LEFT/RIGHT ANALOG]
Choose the input name you want to reprogram
and press the enter button. The soundbar display
will appear to be blank or will display the current
name. Pressing the up/down directional buttons
will cycle through the available alpha-numeric
characters. Pressing the left/right directional but-
tons will move to the next space. You can use up
to seven characters when inputting a new name.
and press the enter button. The soundbar display
will appear to be blank or will display the current
name. Pressing the up/down directional buttons
will cycle through the available alpha-numeric
characters. Pressing the left/right directional but-
tons will move to the next space. You can use up
to seven characters when inputting a new name.
To finish programming an input name, use the left/
right buttons to move all the way to the left or right.
right buttons to move all the way to the left or right.
MENU OPTION: SERVICE
SERVCE: [SERVICE] Enter the ‘SERVCE’ submenu
by pressing the enter button.
by pressing the enter button.
SERVCE > FRMWRE: [FIRMWARE] Pressing the
enter button will display the current firmware version.
enter button will display the current firmware version.
SERVCE > RESET: Enter the ‘RESET’ submenu by
pressing the enter button.
pressing the enter button.
SERVCE > RESET > AT.HOME: Enter the
‘AT.HOME’ submenu by pressing the enter button.
Resetting the soundbar will erase all user-con-
figured presets and wi-fi settings and restore all
settings to the factory defaults home settings. The
‘RESET’ function requires confirmation to reduce
risk of performing an accidental reset.
‘AT.HOME’ submenu by pressing the enter button.
Resetting the soundbar will erase all user-con-
figured presets and wi-fi settings and restore all
settings to the factory defaults home settings. The
‘RESET’ function requires confirmation to reduce
risk of performing an accidental reset.
SERVCE > RESET > AT.HOME > CONFRM:
[CONFIRM] Enter the ‘CONFRM’ submenu by
pressing the enter button.
[CONFIRM] Enter the ‘CONFRM’ submenu by
pressing the enter button.