MartinLogan Motion® Vision X 业主指南

9

WARNING! Turn your soundbar 
off before making or breaking any 
signal connections! WARNING! 
The power cord should not be 
installed, removed, or left detached from the 
soundbar while the other end is connected to 
an AC power source.

POWER CONNECTION
The power cord should be firmly inserted into 
the AC power receptacle on the rear connection 
panel of the soundbar, then to any convenient AC 
wall outlet. The soundbar also integrates a signal 
sensing power supply that automatically switches 
off after sensing no audio signal for 30 minutes 
(this will only occur when the menu’s power setting 
is set to ‘Auto’).

If you remove your soundbar from the country of 
original sale, be certain that AC power supplied 

in any subsequent location is suitable before con-
necting and operating the soundbar. Substantially 
impaired performance or severe damage may 
occur to the soundbar if operation is attempted 
from an incorrect AC power source.

SIGNAL CONNECTION
When utilizing the soundbar to reproduce audio, a 
television’s audio output should be defeated. Some 
televisions will allow you to turn off the internal 
speaker via the television’s menu system. Other 
televisions may require you to turn the television’s 
volume to “zero” or “mute”.

Additionally, your television may require you to 
turn on the digital optical or digital coaxial output 
and configure the output for 5.1 surround sound. 
Please refer to your television’s manual.