Netgear AC1900 Nighthawk™ 业主指南

Select Guest Network.

Select any of the following wireless settings:

Enable Guest Network. When this check box is selected, the guest network is 
enabled, and guests can connect to your network using the SSID of this profile.

Enable SSID Broadcast. If this check box is selected, the wireless access point 
broadcasts its name (SSID) to all wireless stations. Stations with no SSID can adopt 
the correct SSID for connections to this access point.

Allow guest to see each other and access my local network. If this check box is 

selected, anyone who connects to this SSID has access to your local network, not just 
Internet access.

Give the guest network a name.

The guest network name is case-sensitive and can be up to 32 characters. You then 
manually configure the wireless devices in your network to use the guest network name in 
addition to the main SSID. 

Select a radio button for a security option. 

The WPA2 options use the newest standard for the strongest security, but some older 
computers and wireless devices cannot use it. NETGEAR recommends that you select 
the WPA-PSK [TKIP] + WPA2-PSK [AES] radio button. This setting protects your WiFi 
network and lets computers and wireless devices can connect to the WiFi network by 
using either WPA2 or WPA security.

Click the Apply button. 

Your settings are saved.