Yamaha Pro Yamaha P115B 业主指南
P-115 Owner’s Manual
20
Recording Your Performance
You can record your keyboard performance as a User Song in SMF format. Up to two Parts (L and R) can be
recorded separately.
recorded separately.
1
Before recording, make the settings
such as Voice and Beat.
such as Voice and Beat.
Because some of the settings cannot be changed
after the Record mode is engaged, make the set-
tings according to your performance preferences.
For example, if you want to record your perfor-
mance with a Pianist Style, turn on [PIANIST
STYLE].
after the Record mode is engaged, make the set-
tings according to your performance preferences.
For example, if you want to record your perfor-
mance with a Pianist Style, turn on [PIANIST
STYLE].
2
Press the [REC] to engage Record
Ready mode.
Ready mode.
The [REC] lamp will flash according to the cur-
rent tempo. If necessary, set the tempo (page 18).
rent tempo. If necessary, set the tempo (page 18).
3
Play the keyboard or press [PLAY] to
start recording.
start recording.
The [REC] lamp lights up while the [PLAY] lamp
flashes at the current tempo.
flashes at the current tempo.
Play the keyboard and record your performance.
4
Press either [REC] or [PLAY] to stop
recording.
recording.
The [REC] and [PLAY] lamps flash, indicating
that the recorded data is being stored. After Store
is completed, the [REC] lamp turns off.
that the recorded data is being stored. After Store
is completed, the [REC] lamp turns off.
5
To hear the recorded Song, press [PLAY]
to start playback.
to start playback.
Press [PLAY] again to stop playback.
Part Assignment
When either the Pianist Style or Split/Duo is used
for recording, the data as listed below will be
recorded to each part.
for recording, the data as listed below will be
recorded to each part.
You can record your performance to the L part (left
hand part) and R part (right hand part) separately.
hand part) and R part (right hand part) separately.
1
Before recording, make the settings
such as Voice and Beat.
such as Voice and Beat.
2
While holding down [REC], press [R] or
[L] for the part you want to record, to
engage Record ready Mode.
[L] for the part you want to record, to
engage Record ready Mode.
• Note that the Recording operation replaces already
recorded data with the newly recorded data, since only
one User Song is available. Before recording, check
whether the [PLAY] lamp is lit or not. If the [PLAY] lamp is
lit, already recorded data exists and you may want to save
it. To save the recorded data, transfer it to a computer as an
SMF. For details, refer to “Computer-related Operations.”
one User Song is available. Before recording, check
whether the [PLAY] lamp is lit or not. If the [PLAY] lamp is
lit, already recorded data exists and you may want to save
it. To save the recorded data, transfer it to a computer as an
SMF. For details, refer to “Computer-related Operations.”
• You can record up to 100 KB (or approximately 11,000 notes) on this instru-
ment.
Quick Recording
• You cannot engage Record mode while a song is playing.
• You can use the Metronome/Rhythm while recording; however, the Met-
ronome/Rhythm sound will not be recorded. When recording one of the
Pianist Styles along with your performance, the Metronome/Rhythm can
neither be heard nor recorded.
Pianist Styles along with your performance, the Metronome/Rhythm can
neither be heard nor recorded.
NOTICE
NOTE
NOTE
• Never turn off the power while the recorded data is
being stored (while the lamps are flashing). Other-
wise, all recorded data will be lost.
wise, all recorded data will be lost.
L part
R part
When Pia-
nist Style is
on:
nist Style is
on:
Chord change in the
left hand section
left hand section
Keyboard perfor-
mance in the right
hand section
mance in the right
hand section
When Split or
Duo is on:
Duo is on:
Keyboard perfor-
mance in the left
hand section
mance in the left
hand section
Keyboard perfor-
mance in the right
hand section
mance in the right
hand section
Recording Independently to Two
Parts
Parts
• If you select a Part containing data, the Recording opera-
tion will replace the already-recorded data with the new
data.
data.
• When you use Pianist-style, Split or Duo, use the Quick Recording method. You
cannot record each part separately.
NOTICE
NOTICE
NOTE