AKG Pro AKG P170 业主指南
16
P170
Connecting to Audio Equipment
The microphone uses a true condenser transducer designed for 48-volt phantom
powering to IEC 61938. Neither the diaphragm nor the backplate are
permanently polarized, so the microphone needs an external power supply.
powering to IEC 61938. Neither the diaphragm nor the backplate are
permanently polarized, so the microphone needs an external power supply.
The microphone provides a balanced output on a 3-pin male XLR connector:
Pin 1: ground
Pin 2: hot
Pin 3: cold
Pin 2: hot
Pin 3: cold
Figure 2: Connecting to a balanced input with phantom power
1)
Use an XLR cable to connect the microphone to a balanced XLR input with
phantom power.
2)
Switch the phantom power on. (Refer to the user manual of the unit to
which you connected your microphone.)
3
Connecting to Audio Equipment
General
Pinout
Connecting the
Microphone
Microphone