KRK Rokit 6 G3 业主指南

2 

 

 

 
 

                     

Determine the audio input signal 

that  will  be  used  with  the  studio  monitors 
and connect the audio cable (not included) to 
the appropriate input. Typical connections 
direct  to  a  computer  or  DJ  gear  will  use  the 
unbalanced RCA input. Connection to an 
audio interface or mixer will use either a 
balanced ¼” TRS or XLR input. 

Set the volume on the input device (mixer, 
audio interface or computer) to minimum 
level. 

The HF and LF LEVEL ADJUST are set at “0dB” 
(factory setting). The VOLUME is set at “+6dB” 
(factory setting). 

Set the POWER switch to ‘ON’ position. Play 

an audio track and slowly bring up the volume on 
the input device (mixer, audio interface or 
computer) to an acceptable listening level.

 

         Set the POWER switch to ‘OFF’. Connect the AC power cord 
(provided) to the AC inlet socket on the studio monitor and power outlet.  

Warning: Incorrect AC voltage may damage the studio 
monitor.  Make sure the AC power outlet matches the studio 
monitor (should state 100V~, 110-120V~ or 220-240V~.