Nikon Coolpix W300 业主指南

下载
页码 310
197
Troubleshooting
Images are blurred.
• Use the flash.
• Increase the ISO sensitivity value.
• Enable Photo VR when shooting still images. 
Enable Movie VR when recording movies. 
• Use a tripod to stabilize the camera (using the self-
timer at the same time is more effective).
Bright specks appear in 
images captured with 
flash.
The flash is reflecting off particles in the air. Set the 
flash mode setting to W (off).
Flash does not fire.
• The flash mode is set to W (off).
• A scene mode that restricts the flash is selected.
• A function that restricts the flash is enabled.
Digital zoom cannot be 
used.
• Digital zoom is set to Off in the setup menu.
• Digital zoom cannot be used with certain 
shooting modes.
Image mode not 
available.
A function that restricts Image mode is enabled.
Movie options not 
available.
The battery temperature is below 0°C (32°F). If you want 
to continue recording movies with the size/frame rate set 
to d 2160/30p (4K UHD), c 2160/25p (4K UHD), 
1080/60p, f 1080/50p, h HS 480/4×
HS 480/4×, j HS 1080/0.5×, or 
HS 1080/0.5×, remove the battery from the 
camera and warm it up with your palms, etc. before use.
No sound when the 
shutter is released.
Off is selected for Shutter sound in Sound settings 
in the setup menu. No sound is produced with some 
shooting modes, even when On is selected.
AF-assist illuminator 
does not light.
Off is selected for the AF assist option in the setup 
menu. AF-assist illuminator may not light depending 
on the position of the focus area or shooting mode, 
even when Auto is selected.
Images appear smeared. The lens is dirty. Clean the lens.
Colors are unnatural.
White balance or hue is not adjusted properly.
Problem
Cause/Solution
A