Canon PowerShot SX530 HS 业主指南

151

File Error

 

●

Correct printing (

images that have been altered using computer software, even if the camera is 
connected to the printer.

Print error

 

●

the setting is correct, restart the printer and complete the setting on the camera 
again.

Ink absorber full

 

●

Contact a Canon Customer Support Help Desk to request assistance with ink 
absorber replacement.

Connection failed

 

●

 

●

A device could not be found. Turn the camera off and on again, and retry the 
connection.

 

●

Check the device you want to connect to and make sure it is ready for connection.

Cannot determine access point

 

●

The WPS buttons on numerous access points were pressed simultaneously. Try 
reconnecting again.

No access points found

 

●

Check to make sure that the access point is turned on.

 

●

When connecting to an access point manually, make sure that you entered the 
correct SSID.

Incorrect password/Incorrect Wi-Fi security settings

 

●

Check the access point security settings (

IP address conflict

 

●

Reset the IP address so that it does not conflict with another.

Disconnected/Receiving failed/Sending failed

 

●

You may be in an environment where Wi-Fi signals are obstructed.

 

●

Avoid using the camera’s Wi-Fi function around microwave ovens, Bluetooth 
devices, and other devices that operate on the 2.4 GHz band.

 

●

Bring the camera closer to the other device you are trying to connect to (such as 
the access point), and make sure there are no objects between the devices.

 

●

Check the connected device to make sure it is not experiencing errors.

Cannot magnify!/Cannot play back this content in Smart Shuffle/Cannot 
rotate/Cannot modify image/Cannot modify/Cannot assign to category/
Unselectable image.

 

●

The following functions may be unavailable for images that were renamed or 
already edited on a computer, or images shot with another camera. Note that 
starred (*) functions are not available for movies.  
Magnify* (

= 83), Smart Shuffle* (= 85), Rotate* (= 90), Favorites 

= 91), Edit* (= 92), Print List* (= 143), and Photobook Set-up* 

Invalid selection range

 

●

When specifying a range for image selection (

= 87, = 89, = 144), you 

attempted to choose an initial image that was after the final image, or vice-versa.

Exceeded selection limit

 

●

More than 998 images were selected for Print List (

 

●

= 143) or Photobook Set-up (= 145) settings could not be saved 

correctly. Reduce the number of selected images and try again.

 

●

You attempted to choose more than 500 images in Protect (

= 88), Favorites (= 91), Print List (= 143), or Photobook Set-up 

Naming error!

 

●

The folder could not be created or images could not be recorded, because the 
highest supported folder number (999) for storing images on the card has been 
reached and the highest supported image number (9999) for images in folders 
has been reached. On the [

] tab, change [File Numbering] to [Auto Reset] 

= 128), or format the memory card (= 127).

Lens Error

 

●

This error may occur if the lens is held while it is moving, or when the camera is 
used in dusty or sandy locations.

 

●

Frequent display of this error message may indicate camera damage. In this 
case, contact a Canon Customer Support Help Desk.

A camera error was detected (error number)

 

●

If this error message is displayed immediately after a shot, the image may not 
have been saved. Switch to Playback mode to check for the image.

 

●

Frequent display of this error message may indicate camera damage. In this 
case, write down the error number (Exx) and contact a Canon Customer Support 
Help Desk.