Canon PowerShot SX730 HS 业主指南
119
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Using Another Access Point
When connecting the camera to a smartphone through the Wi-Fi menu,
you can also use an existing access point.
1
Prepare for the connection.
●
Access the [Waiting to connect] screen
2
Connect the smartphone to the
access point.
3
Choose [Switch Network].
●
Press the [ ][ ] buttons or turn the [ ]
dial to choose [Switch Network], and then
press the [ ] button.
●
A list of detected access points will be
displayed.
4
Connect to an access point.
●
For WPS-compatible access points,
connect to the access point as described
●
For non-WPS access points, follow steps
access point.
●
All images in the camera can be viewed from the connected
smartphone when you choose [Yes] in step 8. To keep camera
images private, so that they cannot be viewed from the
smartphone, choose [No] in step 8.
smartphone when you choose [Yes] in step 8. To keep camera
images private, so that they cannot be viewed from the
smartphone, choose [No] in step 8.
●
Once you have registered a smartphone, you can change privacy
settings for it on the camera (= 139).
settings for it on the camera (= 139).
●
Connections require that a memory card be in the camera.
●
Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
●
If you prefer not to display recent target devices, choose MENU
(= 29) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
(= 29) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
●
To connect without entering a password in step 5, choose MENU
(= 29) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
[Password] > [Off]. [Password] is no longer displayed on the SSID
screen (in step 4).
(= 29) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
[Password] > [Off]. [Password] is no longer displayed on the SSID
screen (in step 4).
●
You can also send multiple images at once and change the image
size before sending (= 132).
size before sending (= 132).
●
You can send the current image by choosing [Send this image] on
the screen in step 9.
the screen in step 9.