Canon PowerShot G3 X 业主指南

139

When connecting the camera to a smartphone with the [ ] button or 

through the Wi-Fi menu, you can also use an existing access point.

 

z

Access the [Waiting to connect] screen 

 

z

Press the [ ][ ] buttons or turn the [ ] 

dial to choose [Switch Network], and then 

press the [ ] button.

 

z

A list of detected access points will be 

displayed.

 

z

For WPS-compatible access points, 

connect to the access point and choose 

the smartphone as described in steps 

 

z

For non-WPS access points, follow steps 

access point and choose the smartphone.

 

●

All images in the camera can be viewed from the connected 
smartphone when you choose [Yes] in step 5. To keep camera 
images private, so that they cannot be viewed from the 
smartphone, choose [No] in step 5.

 

●

Once you have registered a smartphone, you can change privacy 
settings for it on the camera (= 157).

 

●

Connections require that a memory card be in the camera.

 

●

Once you have connected to devices via the Wi-Fi menu, recent 
destinations will be listed first when you access the Wi-Fi menu. 
You can easily connect again by pressing the [ ][ ] buttons to 
choose the device and then pressing the [ ] button. To add a 
new device, display the device selection screen by pressing the 
[ ][ ] buttons, and then configure the setting.

 

●

If you prefer not to display recent target devices, choose MENU 
(= 31) ► [ 4] tab ► [Wi-Fi Settings] ► [Target History] ► 
[Off].

 

●

You can also send multiple images at once and change the image 
size before sending (= 151).