Canon PowerShot G3 X 业主指南
172
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
●
Vignetting may occur if you use the built-in flash when the lens
hood is attached.
hood is attached.
Using a Remote Switch (Sold Separately)
Still Images
Movies
An optional Remote Switch RS-60E3 can be used to avoid camera shake
that may otherwise occur when pressing the shutter button directly. This
optional accessory is convenient when shooting at slow shutter speeds.
1
Connect the remote switch.
z
Make sure the camera is off.
z
Open the terminal cover and insert the
remote switch plug.
2
Shoot.
z
To shoot, press the release button on the
remote switch.
Using a Lens Hood (Sold Separately)
Still Images
Movies
For wide-angle shots of backlit subjects without using the flash, attach
optional Lens Hood LH-DC100/Filter Adapter FA-DC67B to prevent light
outside the angle of view from entering the lens. To attach a hood, you will
need Filter Adapter FA-DC67B, which is included with the lens hood.
z
Make sure the camera is off.
z
Attach the filter adapter as described
in step 1 of “Using Lens Filters (Sold
Separately)” (= 171).
z
Align the lens hood mark (2) with the filter
adapter mark (1), and turn the lens hood
in the direction of the arrow until it locks
in place.
z
To remove the hood, hold down the hood
release button (3) and turn the hood in
the opposite direction.
z
To attach the lens hood inverted (as
shown) when the hood is not used, align
the lens hood mark (2) with the filter
adapter mark (1), and turn the lens hood
in the direction of the arrow until it locks
in place.
(1)
(2)
(3)
(1)
(2)