Canon PowerShot G3 X 业主指南
57
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Customizing Camera Operation
Customize shooting functions on the [ ] tab of the menu screen as
follows.
Preventing the AF-Assist Beam from Firing
Still Images
Movies
You can deactivate the lamp that normally lights up to help you focus
when you press the shutter button halfway in low-light conditions.
z
Press the [
] button, choose [AF-
assist Beam] on the [ 3] tab, and then
choose [Off] (= 31).
z
To restore the original setting, repeat this
process but choose [On].
Preventing the Red-Eye Reduction Lamp from
Lighting Up
Still Images
Movies
You can deactivate the red-eye reduction lamp that lights up to reduce
red-eye when the flash is used in low-light shots.
1
Access the [Flash Control] screen.
z
Press the [
] button, choose [Flash
Control] on the [ 5] tab, and then press
the [ ] button (= 31).
2
Configure the setting.
z
Choose [Red-Eye Lamp], and then
choose [Off] (= 31).
z
To restore the original setting, repeat this
process but choose [On].
Recording Movies with Subjects at the Same Size Shown
before Recording
Still Images
Movies
Normally, once movie recording begins, the image display area changes
and subjects are enlarged to allow for correction of significant camera
shake.
To record movies with subjects at the same size shown before shooting,
you can reduce image stabilization.
z
Settings] screen.
z
Choose [Dynamic IS], and then choose
●
You can also set [IS Mode] to [Off], so that subjects are recorded
at the same size shown before shooting.
at the same size shown before shooting.
●
[Dynamic IS] is not available when [IS Mode] is set to [Off]
(= 56).
(= 56).
●
Only [Standard] is available when the movie quality is [
]
(NTSC) or [
] (PAL).