Canon PowerShot G3 X 业主指南

93

You can change the flash mode to match the shooting scene. For details 

 

z

Move the [ ] switch.

 

z

Press the [ ] button, choose a flash 

mode (either press the [ ][ ] buttons or 

turn the [ ] dial), and then press the [ ] 

button.

 

z

The option you configured is now 

displayed.

 

●

The setting screen cannot be accessed by pressing the [ ] button 
when the flash is lowered. Move the [ ] switch to raise the flash, 
then configure the setting.

 

●

If the flash fires, vignetting may occur.

Fires automatically in low-light conditions.

Fires for each shot.

 

●

If you prefer the camera not to shoot when you touch the screen, 

make sure [Touch Shutter] mode is deactivated. Press the 

[

] button, choose [Touch Shutter] on the [

2] tab, and 

then choose [Off] (= 31).

 

●

Tracking may not be possible when subjects are too small or 

move too rapidly, or when there is inadequate contrast between 

subjects and the background.

 

●

Even if you are shooting in [ ] mode (= 86), the camera will 

revert to [

] mode if you touch the screen to specify where to focus.

 

●

If [Face ID] is set to [On], names will not display when registered 

people are detected, but the names will be recorded in the still 

images (= 48). However, a name will display if the subject 

chosen to focus on is the same as a person detected with Face ID.

The focus can be locked. After you lock the focus, the focal position will 

not change even when you release your finger from the shutter button.

 

z

With the shutter button pressed halfway, 

press the [

] button.

 

z

The focus is now locked, and [

] and 

the MF indicator are displayed.

 

z

To unlock the focus, hold the shutter 

button halfway down and press the [

] 

button again.

 

●

Cannot be used with Touch Shutter (= 46).

 

●

When [AF method] is set to [1-point AF], you can lock the focus 

during movie recording by touching the screen. To unlock the 

focus, touch [ ].