Fujifilm X100F 业主指南
83
M
o
re
o
n
Ph
o
o
to
g
ra
p
h
y a
n
n
d Pl
a
y
b
a
ck
Flash Photography
FLASH FUNCTION SETTING
FLASH FUNCTION SETTING
The following options
are available with the
built-in fl ash:
are available with the
built-in fl ash:
MODE
Built-In Flash
ADJUST
END
A
Flash control mode: Choose from the options below.
•
•
A
(TTL): TTL mode. Adjust fl ash compensation (
B
)
and choose a fl ash mode (
C
).
•
B
(M): The fl ash fi res at the selected output (
B
) regard-
less of subject brightness or camera settings. Output is
expressed in fractions of full power, from 1/1 to 1/64. The
desired results may not be achieved at low values if they
exceed the limits of the fl ash control system; take a test
shot and check the results.
expressed in fractions of full power, from 1/1 to 1/64. The
desired results may not be achieved at low values if they
exceed the limits of the fl ash control system; take a test
shot and check the results.
•
C
(COMMANDER): Choose if the fl ash is being used to con-
trol remote synced fl ash units, for example as part of a
studio fl ash system.
studio fl ash system.
•
D
(OFF): The fl ash does not fi re.
B
Flash compensation/output: Adjust fl ash level. The options
available vary with the fl ash control mode (
available vary with the fl ash control mode (
A
).
C
Flash mode (TTL): Choose a fl ash mode for TTL fl ash control.
The options available vary with the shooting mode (P, S, A,
or M) selected.
•
The options available vary with the shooting mode (P, S, A,
or M) selected.
•
E
(FLASH AUTO): The fl ash fi res only as required; fl ash lev-
el is adjusted according to subject brightness. A
p icon
displayed when the shutter button is pressed halfway
indicates that the fl ash will fi re when the photo is taken.
indicates that the fl ash will fi re when the photo is taken.
•
F
(STANDARD): The fl ash fi res with every shot if possible;
fl ash level is adjusted according to subject brightness.
The fl ash will not fi re if not fully charged when the shut-
ter is released.
The fl ash will not fi re if not fully charged when the shut-
ter is released.
•
G
(SLOW SYNC.): Combine the fl ash with slow shutter
speeds when photographing portrait subjects against a
backdrop of night scenery. The fl ash will not fi re if not
fully charged when the shutter is released.
backdrop of night scenery. The fl ash will not fi re if not
fully charged when the shutter is released.
D
Sync: Choose whether the fl ash is timed to fi re immediately
after the shutter opens (
after the shutter opens (
H
/1ST CURTAIN) or immediately
before it closes (
I
/2ND CURTAIN). 1ST CURTAIN is recom-
mended in most circumstances.