Canon EOS Rebel T7i Kit 业主指南
74
This section describes how to connect the camera and Connect Station
(sold separately) via Wi-Fi using the NFC function. To save images in
other ways, refer to the Connect Station Instruction Manual.
(sold separately) via Wi-Fi using the NFC function. To save images in
other ways, refer to the Connect Station Instruction Manual.
On the [Wi-Fi settings] screen, set [Wi-Fi] to [Enable] and set [NFC
connection] to [Enable] in advance (p.12, 159).
connection] to [Enable] in advance (p.12, 159).
1
Hold the camera close to Connect
Station.
Station.
Turn on the camera and Connect
Station, then hold the camera’s p
mark close to the Connect Station’s
NFC connect point.
Station, then hold the camera’s p
mark close to the Connect Station’s
NFC connect point.
When a message indicating the Wi-Fi
connection is being established is
displayed on the camera’s LCD
monitor and Connect Station
responds, move the camera away
from Connect Station.
connection is being established is
displayed on the camera’s LCD
monitor and Connect Station
responds, move the camera away
from Connect Station.
When a Wi-Fi connection is
established, Connect Station checks
the images on the memory card, then
saves only the unsaved images.
established, Connect Station checks
the images on the memory card, then
saves only the unsaved images.
2
Terminate the Wi-Fi connection.
After images are saved, the screen
on the left will appear on the camera’s
LCD monitor. Press <0> to
terminate the Wi-Fi connection.
on the left will appear on the camera’s
LCD monitor. Press <0> to
terminate the Wi-Fi connection.
Saving Images
NFC connect point