Canon Speedlite 430EX III-RT 业主指南

62

This section describes wireless (multiple flash) shooting using manual 
flash. You can shoot with a different flash output setting for each slave 
unit (firing group). Configure all the settings on the master unit.

Set the flash mode to <q>.

 

Press the <

E

> button of the 

<S> cross keys of the master unit.

 

Turn <9> to select <R>, then 
press <8>.

 

Press <8>.

 

Turn <9> to select the firing group 
control symbol, then press <8>.

 

Turn <9> to select the group to be 
fired, then press <8>.
<T> : Set all groups to the same 

flash output

<U> : Set the flash output of A 

and B

<V> : Set the flash output of A, B, 

and C

 

Turn <9> to select the firing group 
symbol, then press <8>.

 

Turn <9> to set the flash output, 
then press <8>.

 

With <5> and <7>, repeat 
steps 3 to set the flash output for all 
groups.

X

Each group fires at the set flash ratio.

q: Wireless Multiple Flash Shooting with Manual Output

Firing group control

When <8> is set, set A, B, or C as the firing group for the slave units 
(p.59). The flash will not fire if it is set to D or E.