DJI Osmo Mobile 业主指南
Osmo Mobile User Manual
©
2016 DJI All Rights Reserved.
11
Charging/Upgrade Port
Trigger
Zoom Control
#MJOLJOH1BUUFSO
%FTDSJQUJPOT
— Solid
Green
5IF0TNP.PCJMFJTGVODUJPOJOHOPSNBMMZPSmSNXBSF
upgrade successful.
upgrade successful.
Blinks Green
The Osmo Mobile is initializing / Exiting sleep mode
Slow Pulsing Green
Standby
— Solid
Yellow
The trigger is being held down and the gimbal is in Lock Mode
Blinks Yellow
The gimbal is not functioning normally.
Slow Pulsing Green/
Yellow/Red
Yellow/Red
Charging
Blinks Red Slowly
Low battery level warning
Blinks Red Quickly
Critical low battery level warning
— Solid
Red
/PO%+*CBUUFSZEFUFDUFEPSmSNXBSFVQHSBEFGBJMFE
Tap twice on the trigger to re-center your phone. If the system status LED blinks
yellow, it indicates an error in the gimbal.
yellow, it indicates an error in the gimbal.
[7] Trigger
Hold down the Trigger to enable Lock Mode. The gimbal will stay in its current position
regardless of handle movement. The Osmo Mobile will return to SmoothTrack Mode once
the Trigger is released.
regardless of handle movement. The Osmo Mobile will return to SmoothTrack Mode once
the Trigger is released.
Quickly tap the Trigger twice to center the mobile phone.
Tap three times on the trigger to switch between your phone's front and rear camera.
Switching cameras during video recording will stop the recording.
Switching cameras during video recording will stop the recording.
Hold down the trigger and push the joystick up and down to zoom. This function is
available in the DJI GO app metering mode and when using your phone's rear camera
only. Currently available on iOS only.
available in the DJI GO app metering mode and when using your phone's rear camera
only. Currently available on iOS only.
[8] Charging/Upgrade Port
To charge the Osmo Mobile by connecting to this port.